TEXWRAP 3618ISSR Intermittent Side Seal Wrapper + STE-1348OCS HEAT Tunnel System 2021-
TEXWRAP # 3618 ISSR INTERMITTENT MOTION SIDE SEAL SHRINK
SYSTEM W/ TEXWRAP
# 1348 OCS OVERHEAD COMPRESSION SHRINK TUNNEL W/ALLEN BRADLEY PLC CONTROL
SWIVEL TOUCHSCREEN OPERATOR INTERFACE
ADJUSTABLE FILM
INVERTING HEAD
PIN PERFORATOR
VARIABLE SPEED CONTROL
INFEED CONVEYOR SPEED TRIM TO CONTROL PRODUCT
SPACING W/ GREEN MACHINE SIDE SEAL SYSTEM.
(2021) SYSTEM IS IN GOOD CONDITION
42” HOT KNIF CROSS SEAL W/ PRECISION TEMPERTURE CONTROL
36” W INFEED AND EXIT CONVEYOR
CALIBRATED ADJUSTMENTS FOR PRODUCT SET UP
MAX. PKG. SIZE: 17” H x 34” W x INFINITE LENGTH (CANNOT COMBINE ALL MAX. DIMENSIONS)
MIN. PKG. SIZE: 4” L x 3” W
MAX. FILM WIDTH: 44” CENTER-FOLDED
MAX. FILM SPEED: 100/ FPM
POWER: 208/240V; 1 PH.; 43/37 AMP
AIR REQUIRED: 80 PSI
SERIAL # IMSS-MTX 52658
TEXWRAP # 1348 OCS SHRINK TUNNEL W/ SS MESH BELT
CONVEYOR. 13” H TUNNEL OPENING X 48” W
POWER: 480V; 3 PH.; 73 AMP
ERIAL # V-MTX 52658
The 3618 is Texwrap’s intermittent motion side
seal machine designed to run very large products
at moderate speed. A larger version of the 2602
and 3014, it has a capacity of 36″ wide and 18″ tall.
The 3618 is versatile enough to accommodate a
variety of product sizes and configurations.
The 3618 uses Texwrap’s exclusive Versa Seal
side seal to insure consistent, high quality seals
across a wide range of film types. The TVS tightly
clamps the film between parallel belts while a heating element seals and separates the film between
them. The slightly diverging belts continue to
clamp the film securely allowing the film seal to
cure and, at the same time, assuring reliable
scrap/trim separation. The belts on the TVS design
also control film tension allowing consistent seals
to be made using the absolute minimum film width
possible saving money on every package.
Flexibility and ease-of-use are hallmarks of
Texwrap design. With standard autospacing control, horizontal as well as vertical photoeyes, and
the ability to precisely vary the conveyor speeds to
relax the film between products, the 3618 can
accommodate randomly fed or choke-spaced
product and accurately separate them for reliable,
consistent packages using the absolute minimum
amount of film.
Features:
· Texwrap’s exlcusive Versa Seal side seal
· 42” hot knife cross seal with precision temperature control
· 36” wide infeed & exit conveyor
· 18” cross seal jaw opening
· Calibrated adjustments for product set-up
· Self contained scrap wind-up
· Horizontal and vertical photoeye controlled cross seal to provide automatic adjustment for bag length
· Pin perforator/brush air evacuation system
· Variable speed control with belt speed of 100 feet per minute
· Independent exit conveyor speed control
· Automatic autospace tuning feature adjusts machine to match upstream production
· Autospacing for control of randomly spaced or choke fed products
· Allen Bradley PLC control
· Product set-up helper
· Adjustable film inverting head with controlled air bearing surfaces
· Autospace multipack ability
Specifications:
Maximum package size: 17”H x 34”W x infinite length (Cannot combine all maximum dimensions- limited by film width)
Minimum package size: 4”L x 3”W
Maximum film width: 44” centerfolded
88” single wound (on optional, larger film unwind)
Electrical requirements: 240/208 Vac, 1 phase, 25 amps
Air requirements: 80 PSI
Machine controls: Allen Bradley
Maximum film speed: 100 FPM
Operator control panel: Swivel access, swivel mounted
