Takisawa TT-2100G Type C Twin Spindle Auto Load – Year 2022
Takisawa TT-2100G Parallel Twin-Spindle Twin-Turret CNC Lathe
Chuckers Delivered New August 2022
Demo Machines
Set up for fluid couplings
Never ran production.
Your choice of one machine.
Two are available.
Specification sheet is at end of photos.
| （Turning） | |||||
|---|---|---|---|---|---|
| TT-2100G | |||||
| Chuck Size | inch | 6+6 | 8+8 | ||
| Type of Turret | 10-Station Turret （All-Holder Type） |
12-Station Turret （All-Holder Type） |
10-Station Turret （All-Holder Type） |
12-Station Turret （All-Holder Type） |
|
| Max. Turning Diameter | mm | φ240 | |||
| Max. Turning Length | mm | 135.5 | 94 | ||
| Spindle Speed | min-1 | 4500 [OP. 6000] | 3200 [OP. 4500] | ||
| Rotary Tool Speed | min-1 | – | |||
| Rapid Traverse Rate | m/min | X : 24 / Z : 24 | |||
| Spindle Motor （15 min/continuous） |
kW | 7.5/5.5 [OP. 11/7.5] | 11/7.5 | ||
| Rotary Tool Motor （15 min/continuous） |
kW | – | |||
| Machine Height | mm | 2700 | |||
| Required Floor Space | mm | 2825×2615 | |||
| Machine Weight | kg | 5200 | |||
| （Turning＆Milling） | |||
|---|---|---|---|
| TT-2100CMG | |||
| Chuck Size | inch | 6+6 | 8+8 |
| Type of Turret | Rotary Tool Type 10-Station Turret | Rotary Tool Type 10-Station Turret | |
| Max. Turning Diameter | mm | φ240 | |
| Max. Turning Length | mm | 135.5 | 94 |
| Spindle Speed | min-1 | 4500 [OP. 6000] | 3200 [OP. 4500] |
| Rotary Tool Speed | min-1 | 2500 | |
| Rapid Traverse Rate | m/min | X : 24 / Z : 24 | |
| Spindle Motor （15 min/continuous） |
kW | 7.5/5.5 [OP. 11/7.5] | 11/7.5 |
| Rotary Tool Motor （15 min/continuous） |
kW | 5.5/3.7 | |
| Machine Height | mm | 2700 | |
| Required Floor Space | mm | 2825×2615 | |
| Machine Weight | kg | 5400 | |
| Chuck Size | inch | 6+6 | 8+8 |
| Outside Diameter | mm | φ80 [OP. φ160*1] | φ160 [OP. φ80*2] |
| Length | mm | 80 | |
| Weight | kg | 0.7 (×2) [OP. 3 (×2)*1] | 3 (×2) [OP. 0.7 (×2)*2] |
[*1] or [*2] are options by a set.
| Chuck Size | inch | 6+6 | 8+8 |
| Number of Pallets | 16 | ||
| Loading Capacity(Per Pallet) | kg | 40 | |
| Work Stacking Height | mm | 450 | |
Why do Customers prefer using Takisawa TT-2100G Parallel Twin-Spindle Twin-Turret CNC Lathe?
One (1) Takisawa TT-2100G C-Type 6″ (MUST SELL 1st)
One (1) Takisawa TT-2100G C-Type 8″
Choice of 2 machines. These machines are under power. Not needed for existing work.
No returns after loading
Specs:
TWO MACHINES
One (1) Takisawa TT-2100G C-Type 6″ (MUST SELL 1st)
One (1) Takisawa TT-2100G C-Type 8″
Fanuc 0i-TF Control
Flat 140mm Spindle Nose
Spindle motor: 15 HP | Max 4,500 rpm
Highly Rigid Box Guide Ways for X and Z axis
2 x 520W Coolant Pump (Upgraded from 250W)
Front Door Interlock
3-Color Signal Tower
2 x Programmable Air Blow for Chuck by M-Function
Turn Over Device (includes 1 set of hand jaws)
1 x Enomoto Chip Conveyor (Rear Discharge Hinge Type)
Raku-Raku Monitor Software (Takisawa Tool Counter/ Tool Life Management)
Base Machine Investment: $ 302,098.00
System Enhancements:
Chucking System
(2) 8″ Hydraulic Chuck & Actuator | Kitagawa N-8 (3-jaw) Included Included
Programmable Chuck Open/Close (with 2 Proximity Switches) Included Included
Spindle Speed upgrade from 3,200 to 4,500 rpm max Included Included
Turret
(2) 10 Station Turret
(2) Face Tool Holder – 1.0″ x 1.0″ Included Included
(4) Round Tool Holder – Φ1.25″ Included Included
(4) O.D. Tool Holder – 1.0″ x 1.0″ Included Included
Raku-Raku Monitor Included Included
Gantry Loader
Work Feeder (16 Pallets w/ 3 Pole Guide Bars) Included Included
Upgrade to 8″ spec MAX Ø 6.3″ | L 3.15″ | 6.6lb (x2) Included Included
NG Chute, with Full Workpiece Sensor Included Included
Gantry Loader Air Blow Included Included
Raku-Raku Loader Software (Takisawa Loader Programming Software) Included Included
Enhancements:
Chuck Open/Close Button on Control Panel Included Included
“Raku Raku” Monitor for Broken Tool and Unattended Work Monitoring Included Included .
