Pivatic PivaPunch Punching Line PCC125-e – Year 2013
Manufacturer: Pivatic
Model: PCC125-e
Year of construction: 2013
Condition: ready for operation (used)
Functionality: fully functional
PivaPunch punching center PCC 125-e – in very good condition with few operating hours.
System consisting of coil car,
decoiler,
straightening machine,
loop pit with hydr. transfer tables,
automatic punching machine,
scrap removal system,
exit conveyor,
sheet turning unit,
stacking system and Siemens system control.
Technical data:
Coil weight: 10,000 kg
Coil inner diameter: 508 mm
Coil outer diameter: 1,600 mm
Material thickness: 0.5 – 1.5 mm
Material width: 60 – 1,250 mm
Tensile strength: max. 400 N/mm2
Product dimensions: max. 2,500 mm long
General technical details of PivaPunch PCC125-e Electrical Punching Centre for
Coils
Ambient temperature
This equipment is designed for the max. ambient temperature of 45 °C.
Main connection details
Electrical connection,
TN-S rated (3 phases and PE, N not required)
voltage 3*400 V
fluctuation +6,-10 %
frequency 60±5 Hz
Main fuses 63 A
Pneumatic connection 800 l/min at 6 bar
Hydraulic power (200 bar) 5.5 kW
Colour of line components
Colour of the line is blue acc. to 5015 RAL
Covers are light grey acc. to 7035 RAL
Configuration and lay-out
The configuration of the tool stations according to drawing PCC125 TTf Slide
The line layout drawing acc. to drawing number ORD-01005-W9V2
Material data
Steel strip, strength up to 400 N/mm²
Surface pre-painted, plastic covered, galvanised
Coil weight up to 10 000 kg
Sheet thickness 0,5…. 1.50 mm
The diameter of the inside hole of coils 508 mm
The outside diameter of coils up to 1 600 mm
Strip width 60…1 250 mm
Product data
Cut blanks up to 2 500 mm
Punched blanks up to 2 500 mm
Accuracy of parts produced:
When using proper material without chamber and internal stress and the strip being stiff
enough (thickness/width), following tolerances apply:
PivaPunch incl. one Punching Station
Hole-to-hole tolerance of up to 2 000 mm long punched blanks ± 0,15 mm in X and Y
directions. The tolerances of your parts are confirmed on request.
# These tolerances are valid for blanks up to 2 000 mm long which camber does not exceed
1 mm.
Complete Line Controller and Electrical Systems of the PCC125-e 1
Including the following equipment:
Electrical system
-Electrical cabinet is placed next to the hydraulic unit.
-Cables between the line components are laid in an overhead bridge between the
Electrical cabinet and the Punching station, otherwise they are on the floor in
aluminium covers.
-Customer to supply and connect the mains.
-Electrical components are installed on assembling plates leaving space for
modifications.
-The electrical components are mainly from Siemens, Omron and Telemecanique.
Pneumatic system
-Hoses between the service unitt, valves and cylinders are delivered. Customer to
supply and connect the service unit and connection.
Line controller Siemens Sinumerik 840 D
-Siemens Sinumerik 840 D numerical control and integrated PLC acc. to the line set
up..
-Step 7 programming language used.
-Detailed specification available as separate document.
-The Sinumerik controller is installed in a separate control cabin together with the
PC.
-Complete Keyboard for the Sinumerik controller.
-Common colour display with the PC
-All texts available for the operator are in English.
Hydraulic system
-There is a small power pack for the cylinder functions like: Mandrel expansion,
opening & closing of the Straightener and the cylinders of the Feeder.
-Complete pipe lines and hoses between the line components and the power pack
are included.
-Hydraulic pipes and cables are laid on the floor in aluminium covers.
Industrial PC
-For part programming and for the Pivatic Multimedia Machine Documentation:
-Installed to the same control cabin with the Sinumerik controller
-19” colour display in common for the Sinumerik controller and for the PC.
-Windows 7 User System in English is supplied.
-The PC is fully assembled and Pivatic specified programs included are fully
assembled ready for the customer. The PC has been designed for Pivatic line
control purposes and installation of non –Pivatic specified software must be agreed
separately.
Pivatic Technical Document-1
Pivatic Technical Document-2
Pivatic Technical Document-3
