Kasto BBS U 8×20 Semi-Automatic Vertical Bandsaw – Year 2016
Structural steels, Stainless steel, Tool steel, Steels for special application

Max cutting Thickness- 35″
Max cutting length- 220″
Smallest cut Width-.4″
Largest cut Width- 78.7″
Min/Max blade speed- 13-130m/min
Min/Max feed Rate- 0.7-270mm/min
Part adjustment roller capacity- 15tons
Power supply 440V/80A/60Hz

Standard Dimensions
Width when protective cover is Open: 288.4”
Height without line laser unit: 155.9”
Height with line laser unit: 179.5”
Height of material; support table: 61.0”

Cutting Ranges
Maximum cutting height
With band control: 33.9”
Without bang control: 35.4”
With pressure rollers: 30.7”
Smallest cut-piece width: 0.4”
Largest cut piece width
With electro motive measuring stop: 78.7”
With manual measuring stop: 70.9”
Without measuring stop: 81.1”

Speeds
Cutting speed: 13-130 m/min.
Feed rate: 0.7 – 270 mm/min

Saw Blade
Standard: 384” x 2.1” x 0.06”
As an alternative: 384” x 2.6” x 0.06”
Tooth set width: 0.1”
Saw blade guide: Carbide
Saw blade back guide: Roller
Saw blade clamping: Hydraulic
Saw blade clamping pressure
With saw blade width 54 mm: 40
With saw blade width 67 mm: 67
Saw blade cleaning: Plastic brush

Measuring ranges for measuring stops
Manually movable
Range: 0 – 78.7”
Motorized
Range (a): 0 – 66.5”
Range (b): 12.2” – 78.7”
Drive capacity: 17.4”
Saw motor: 10.1”

Equipped with:
Infinitely Variable Bandsaw Blade Speed
Bi-Metal or Carbide Saw Blades
Semi-Automatic Operation
Vibration-Free Performance
Space-Saving Design
Set of Old flywheels
8 blades (Available for Extra Cost)

Manufacturer Catalogue Information about
KASTObbs U :
Saw type: Bandsaw
Cutting option: Vertical cut
Automation: Semi automatic
Materials: Structural steels, Stainless steel, Tool steel, Steels for special application
Material width: 2060 mm / 81.1 inch
Material height: 2120 mm / 83.46 inch

The space-saving block bandsawing machine for more flexibility.
Is it your job to cut different dimensions from different plates and blocks from your existing material using the longitudinal cutting method?

Does the majority of your cutting tasks consist of cutting heavy blocks including billets and plates and/or rectangular or flat materials? If so, you will find a sawing machine that suites your needs amongst the block bandsawing machines from the KASTObbs U series.

Thanks to the longitudinal cutting method, different cross-section dimensions can be configured from your material. KASTO block and plate sawing machines are installed on the floor and can be repositioned if needed. This provides maximum processing and positioning flexibility. Since the sawing machine moves instead of the workpiece, the footprint is reduced by approx. 50%, resulting in lower occupancy costs.

Advantages of the block bandsaw KASTObbs U:

Infinitely variable bandsaw blade speed
By using bi-metal or carbide saw blades, all material qualities, including difficult-to-cut materials such as titanium, Hastelloy and Inconel can be cut with high cutting performance.
The smooth running and vibration-free operation guarantees accurate results – the result: shorter cutting times and longer tool life

The KASTObbs U is available in the following variants
KASTObbs U 3 x 20
KASTObbs U 4 x 16
KASTObbs U 5 x 10
KASTObbs U 6 x 16
KASTObbs U 8 x 10
KASTObbs U 8 x 16
KASTObbs U 8 x 20
KASTObbs U 10
KASTObbs U 10 x 20
KASTObbs U 10 x 25
KASTObbs U 12 x 15
KASTObbs U 13 x 10
KASTObbs U 15 x 10
KASTObbs U 15
KASTObbs U 16 x 20
KASTObbs U 18 x 8
KASTObbs U 18 x 15
KASTObbs U 20