Dörries-Scharmann VCE2000/180MC-FC Contumat VTL
High-Production Live-Spindle/C-Axis Vertical Turning Lathe with full set of D-S milling heads, including angular head and probing device.
Also equipped with 3 x 1250mm diameter 4-jaw pallet chucks and shuttle system. The pallet change system is for ultra-high volume production and may or may not be involved with the machine.
Manufactured/Supply Date: 2002 ONLY 1.5 YEARS RUNNING TIME FROM NEW!
Condition: Excellent Control: Siemens 840D Full Documentation: Yes
Specification:
Table diameter 1800mm (70.86”) with 4 x independent jaws
Swing 2000mm (78.74”)
Working height 2451mm (96.50”)
Crossrail traverse 900mm (35.43”) in increments of 100mm (3.94”)
Crossrail traverse speed 425mm/min
Crossrail saddle cross feed rate 18m/min
Ram section 250x250mm (9.84×9.84”)
Ram traverse 1500mm (59.06”)
Saddle traverse 1350mm (53.15”) from centre left + right
Maximum table load 12 tonnes
Main drive motor 60Kw
Table speeds 1.7-315Rpm (in 2 x ranges)
Milling drive motor 30Kw
Milling speeds 8-3000Rpm (in 2 x ranges)
Dorries-Scharmann Milling System: System 250-2
Milling spindle holder SK50
Milling spindle cooling thru spindle
Cutting force on turning tool 50Kn
C-axis speed 0.003-4Rpm
Operating voltage 380/415
Control voltage 24vDC
Frequency 50Hz
Total connected power load approximately 173Kva
Total machine weight approximately 76 tonnes
Tool Change System
PLATE-TYPE 9-STATION MAGAZINE for taking up lathe/basic toolholders & machining heads.
TOOL CHANGE UNIT guarantees the automatic change of milling & lathe tools into the toolholders. The gripping head is constructed as a double gripping unit and can change the tools in both vertical and horizontal working positions.
