DCM Tech Inc PDG-5-5 DCAF Punch & Die Grinder/Sharpener – Year 2017

Manufacturer DCM Tech Inc.
Model Model PDG-5-5 DCAF Punch & Die Grinder/Sharpener
Year 2017
Condition Used
Number of T-Slots 6 Slots
Rotary Table Diameter 18″
Table Speed 20 RPM
Table Motor 1/2 HP
Maximum Height 10″
Speeds 3600 RPM
Spindle Motor 5 HP
Autofeed Rate – Infinitely Variable 0.0005 – 0.020 IPM
Manual Handwheel Graduations 0.001″
Cut Wheel Type 6 or 11
Maximum Wheel Size 6″ OD
Spindle Hole 1.25″
Tilt Angle 0 – 10 Degrees
Machine Dimensions LxWxH 42″ x 36″ x 64″
Machine Weight 1,500 lbs.

Auto Cycle

Auto Downfeed

Rotary Table Surface Grinder

Self Dressing CBN Straight Wheel

Wired 230V / 3 PH / 60 Hz Electrics

Primarily Designed for sharpening turret press tooling, but also for sharpening of rooftop punches and small progressive die details

The Punch and Die Grinder (PDG), a Rotary Table Surface Grinder, is primarily dedicated to the sharpening of turret press tooling, but also includes the sharpening of rooftop punches and small progressive die details. DCM Tech’s Punch and Die Grinder is a turnkey package with autofeed control, self dressing CBN abrasives, through spindle coolant and universal fixturing that accepts Amada, Trumpf, Salvagnini, Finnpower, Weideman, Whitney, and other style tooling. Sharpen large station dies and rooftop/shear angle tooling up to 10 degrees with the standard fixturing package. Typical grind time is less than 5 minutes.

Look to the PDG Punch and Die Grinder for:

Reduced replacement tooling costs by as much as 40%
Reduced or eliminate deburring operations
Gained labor efficiencies

Sharpen Turret Press Tooling
Regrind Carbide Pump Seals
Grind Carbide Tooling
Sharpen Ironworker Tooling
Sharpen Rooftop Punches
Sharpen Progressive Dies
Regrind Dies Sets
Debur Stripper Plates