Chiron FZ 08K S MAGNUM high speed – Year 2004
CNC Vertical Machining Center
New – 2004
S/N – 225-36
Cutting Hours – 18568

SPECIFICATIONS:
Travels:
– X-Axis (Column)…………17.71″
– Y-Axis (In-Out)…………10.62″
– Z-Axis(Vertical)…………11″
Maximum Bar Capacity……..1.25″ (32mm)
Drilling Capacity in 1060 Steel w/Carbide Drill…………0.63″
Tapping…………0.5″
Milling Capacity in 1060 Steel…………3.65 ci/min
Milling/Turning Tool Taper…………HSK A-40
Tool Diameter – Maximum…………1.9″ or 3.94″ if adjacent places are free
Tool Weight – Maximum…………1.5 Lbs
Tool Length – Maximum…………6.3″
Tool Change Time…………Approx. 0.6s
Chip-to-chip Time…………Approx. 2.2s
Milling Spindle Speed…………20 – 27,000 RPM
Spindle Bearing Diameter…………1.57″
Tool Clamping Force…………1012 lbf
Throat Distance – Spindle to Column…………7.8″ – 18.5″
Distance – Spindle Nose to Table Surface…………6.7″ – 17.7″
Thrust on X/Y-Axis…………450 lbf
Thrust on Z-AxisThrust on X/Y-Axis…………450 lbf 675 lbf
Accelerations:
– X-Axis…………23 ft/s²
– Y-Axis…………23 ft/s²
– Z-Axis…………33 ft/s²
Fixed Table Clamping Surface…………30.3″ – 11.4″
Table Load…………331 lbf
Machine Weight – Approximate…………5,292 Lbs
High Speed Plus Drive:
– Power – Maximum…………5 HP
– Torque – Maximum…………6 ft lb
– Rapid Traverse Rate – X/Y/Z Axes…………2953 ipm
– Speed X/Y/Z Axes – Maximum…………33/49.2/65.6 ft/s²
Approximate Shipping Weight…………7,055 Lbs.

EQUIPPED WITH:
Fanuc Series 18i-MB5 CNC Controller
High Speed Plus Version , 30,000 RPM Spindle
Lathe Spindle (A-Axis) 8000 RPM, Water Cooled, Pneumatic Clamping
Swivel Head (B-Axis)
Table Left to Right (V-Axis) runs parallel to X-Axis
Swivel Vise (C-Axis) rotates to hold bar, then part-off. Has 360 deg. rotation.
40 Station (Chain Style) Automatic Tool Changer
Renishaw TS27R Probe System
Heindenhain Linear Measuring System
Coolant System
Burn Engineering model WK 4500-C28 Spindle Chiller Unit
Rittal Enclosure Cooling Unit
Miscellaneous Tool Holders & Collets
Books, Manuals + Drawings