Walter HELITRONIC POWER REGRINDER 5-osi – Year 1999
| CNC | Yes |
| Type of CNC | HMC 500 |
| Max. longitudinal travel | 470 mm |
| Cross travel | 320 mm |
| Max. height from spindle to table | 660 mm |
| Spindle power | 25 kW |
| CNC 5 Axes Tool Grinding Machine | |
| Length x width x height | 2427.0 × 2930.0 × 2273.0 |
| Weight | 4600 kg |
CNC grinding machine WALTER HELITRONIC POWER REGRINDER 5-AXIS was built in Germany by Walter Maschinenbau GmbH in 1999. The tool grinder enables grinding of various types of knives and tools for working with wood and metal. It grinds details with a maximum length of 350 mm (peripheral grinding) or 280 mm (face grinding) and a maximum diameter of 320 mm.
The speed of the grinding wheel and spindle in the machine can be adjusted in the range from 0 to 9500 rpm. The feeds in the X / Y / Z axes take place along the length of 470 mm (X axis), 320 mm (Y axis) and 660 mm (Z axis).
The CNC grinder is equipped with 5 axes, a CNC HMC 500 controller and an ISO 50 spindle taper, and the additional equipment includes a TRANSOR 6190-500M oil filtration device, a robot and a DSL SIGMA oil mist extraction device. In the grinder, the screws in the Y and Z axes were replaced. In August 2021, the machine passed the technical protocol prepared by the Walter company.
Technical data of the HELITRONIC POWER REGRINDER CNC grinding machine
– CNC controller: HMC 500
– 5 axes
– maximum feeds in the X / Y / Z axes: 470/320/660 mm
– C rotary axis: 200 degrees
– maximum diameter of the workpiece: 320 mm
– maximum workpiece length in peripheral grinding: 350 mm
– maximum workpiece length in face grinding: 280 mm
– grinding wheel speed range: 0 – 9500 rpm
– spindle speed range: 0 – 9500 rpm
– spindle taper: ISO 50
– height in the center of the machine (with / without worktable): 145/190 mm
– total power requirement: 25 kW (400 V / 50 Hz)
– rated current: 36 A
– dimensions (L x W x H): 2427 x 2930 x 2273 mm
– total weight of the machine WALTER HELITRONIC POWER REGRINDER: 4.6 t
HELITRONIC POWER REGRINDER machine equipment
– new XP software
– package 1, 2, 3, 4, 5, 16, ACM
– HELIDRILL and HELIFLUTE programs
– robot
– oil filtration device: TRANSOR 6190-500M
– mandrels with collets for automatic clamping
– automatic fire extinguishing system
– bathtub with a pump and a refrigerator
– grinding wheels (20 pcs.)
– handles for grinding wheels (6 pcs.)
– calibration mandrels (2 pcs.)
– oil mist extraction: DSL SIGMA
– Tool locker
Made in Germany
