Solar Turbines Taurus 60 Gas Turbine – Year 2015

Used Solar Taurus 60
– refurbished in 2022; turbine and gearbox replaced
– Includes Leroy Somers alternators, 6300V
– 5200KW
– 0h since last overhaul
– Equipment included on a steel frame: whole lubricating oil system integrated inside the turbine enclosure, as well as the air-to-oil cooler and fuel system between the gas turbine interface
– Also includes: fuel control valves, pipes, pipes & filters, switches, transmitters, oil exchanger for oil coolers, air filters, control panels, acoustic stainless steel enclosure, cables

Ready for immediate delivery

Catalogue General Specifications

Taurus™ 60 Gas Turbine

• Industrial, Single-Shaft
• 12 Stage Axial Compressor
  • Variable Inlet Guide Vanes and Stators
  • Pressure Ratio: 12.1:1
  • Inlet Airflow: 21.5 kg/sec (47.3 lb/sec)
  • Vertically Split Casing
• Combustion Chamber, Annular-Type
  • 12 Conventional Fuel Injectors or
  • 12 Lean-Premixed, Dry Low Emissions SoLoNOx™ Injectors
  • Single Torch Ignitor System
• Power Turbine
  • 3-Stage Reaction
  • Clockwise Rotation
• Bearings
  • 3 Radial Journal: Tilt-Pad
  • 1 Thrust, Active: Tilt-Pad
  • 1 Thrust, Inactive: Fixed Tapered Land
• Coatings
  • Compressor: Inorganic Aluminum
  • Turbine and Nozzle Blades: Precious Metal Diffusion Aluminumide
• Vibration Transducer Type
  • Proximity Probes, 2 per Radial Bearing
  • 2 per Thrust Bearing, horizontal and vertical

Main Reduction Drive

• Epicyclic Type
• 1500 or 1800 rpm (50 or 60 Hz)
• Vibration monitoring: Acceleration Transducer

Generator

• 4 Pole, 3 Phase, 6 Wire, Wye Connected, Synchronous with Permanent Magnet Generator Excitation
• Available Construction Types:
  • Open Drip-Proof Construction
  • CACA/TEAAC (Closed Air, Cooling Air/ Totally Enclosed, Air to Air Cooling)*
  • CACW/TEWAC (Closed Air, Cooling Water/Totally Enclosed, Water to Air Cooling)*
• Sleeve Bearings
• Vibration Monitoring: Velocity Transducers
• Vibration Monitoring: Displacement

Transducers*

• NEMA Class F Insulation
• Class F Temperature Rise
• Class B Ambient Temperature Rise*
• Continuous Duty Rating Voltages:
  • 3300, 6600, 11 000 (50Hz)
  • 4160, 6900, 12 470, 13 200, 13 800 (60Hz)

Package

• Mechanical Construction
  • Steel Base Frame with Drip Pans
  • 316L Stainless Steel Piping
  • Compression Type Tube Fittings
• Start System
  • Direct Drive AC Motor with VFD Control
• Package Electrical Certification
  • NEC, CSA Class 1, Group D, Div.2
• Fuel System
  • Natural Gas
  • Diesel*
  • Dual (Natural Gas and Diesel)*
  • Low BTU Gas*
• Integrated Lube Oil System
  • Turbine-Driven Lube Pump
  • Motor Driven Pre/Post Lube Pump
  • DC Motor Driven Backup Lube Pump
  • Air to Oil Cooler
  • Water to Oil Cooler*
  • Integral Lube Oil Tank
  • Lube Oil Tank Heater*
  • Lube Oil Filter
  • Duplex Lube Oil Filter*
  • Oil Tank Vent Separator with Flame Arrestor
• Air Inlet and Exhaust Systems
  • Carbon Steel
  • Stainless Steel*
  • Barrier Type Filters
  • Self-Cleaning Filters
  • Inlet and Exhaust Silencers
  • Inlet Evaporative Cooler*
  • Inlet Chiller Coils*
• Enclosure
  • Complete Package
  • Driver Only*
• Fire Detection and CO2 Suppression System
• Turbine Compressor Cleaning Systems

Additional Options

• On-Crank/On-Line
• Portable Cleaning Tank*
• Package Power
  • 120VDC Battery/Charger System*
• Turbotronic™ On-Skid Gas Turbine and Generator Control System Features
  • Combination Generator Control Module with Load Share, Auto Synchronization, Voltage Control
  • Standard Display with Discrete Event Log, Strip Chart, Historical Trend, Maintenance Screen
  • Vibration and Temperature Monitoring
  • English Display Text and Labels
  • Spanish, Portuguese, German, French or Simplified Chinese Display Text and Labels*
  • Auxiliary and Remote Display/Control Terminals*
  • Turbine Performance Map*
  • kW Import Control*
  • KVAR/Power Factor Control*
  • ControlNet Redundant Media, Ethernet or Modbus RS232C/422/485 Supervisory Interface*
  • Heat Recovery Application Interface*
  • Multi-Unit Applications: Load Shed Control, Import/Export or kW/KVAR Control Panels*
  • InSight Platform™ Equipment Health Management*
  • Printer/Logger*
• Electrical System Options
  • Neutral Grounding Resistor or Transformer*
  • Switchgear and Generator Protective Relay*
  • Motor Control Center with Automatic Transfer Switch*
• Documentation
  • Drawings
  • Quality Control Data Book
  • Inspection and Test Plan
  • Test Reports
  • O&M Manuals
• Factory Testing of Turbine
  • Factory Testing of Package Systems
  • Non-Dynamic
  • Dynamic