Geometrically and Electrically Generator Overhauled!!!
according to CE Norm!!
Machine data:

grinding length 400 mm
Swing diameter 125 mm
Centre height above table 85 mm
Mass between the tips 15 Kg
Mass for forage work 12 Kg

Work headstock:
with turning part to swivel the headstock
against the grinding wheel 90 degrees

workpiece revolutions: infinitely variable 200 – 1000 rpm

Tailstock: tiltable with dressing device

Table speed: for longitudinal grinding, 0.05 – 6 m/min
Standstill at the reversal points 0 – 5 sec.

Table can be swivelled in the direction of the grinding wheel 3
away from the grinding wheel 6

Grinding headstock feed path max. 55 mm hydraulic
additional adjustment 85 mm
Quick adjustment, hydraulic 32 mm
Swivel range +/- 45 °

Grinding wheel: Max. diameter 315 mm, width 32 mm
Bore 127 mm, peripheral speed 35 m/s

Fine feed with inching lever mm 0.005
Infeed per handwheel revolution mm 2
Infeed per table stroke autom. mm 0,001 – 0,06
Plunge stroke, automatic mm 1.7
Coolant tank:
integrated in the machine bed
with coolant pump and automatic magnetic filter

Electrical connection values:
operating voltage 400 V
Frequency 50 Hz
Auxiliary voltage 24 V DC, 230 V AC
Total connected value

ROWEIG SU 125/S x 400 – Year 2020

Machine data:

Grinding length 400 mm
Swing diameter 125 mm
Center height above table 85 mm
Mass between the tips 15 kg
Weight during forage work 12 kg

Workhead:
with rotating part for swiveling the headstock
against the grinding wheel 90 degrees

Workpiece revolutions: continuously 200 – 1000 rpm

Tailstock: swiveling with dressing device

Table speed: for longitudinal grinding, 0.05 – 6 m/min
Standstill at the reversal points 0 – 5 sec.

Table can be swiveled in the direction of the grinding tool by 3°
away from the grinder 6°

Grinding headstock infeed path max. 55 mm hydraulic
additional adjustment 85 mm
Quick adjustment, hydraulic 32 mm
Pivoting range +/- 45°

Grinding wheel: max. diameter 315 mm, width 32 mm
Bore 127 mm, peripheral speed 35 m/s

Fine infeed with jog lever mm 0.005
Infeed per handwheel revolution mm 2
Delivery per table lift autom. mm 0.001 – 0.06
Plunge path, automatic mm 1.7

coolant reservoir:
integrated in the machine bed
with coolant pump and automatic magnetic filter

Electrical connection values:
Operating voltage 400 V
Frequency 50Hz
Auxiliary voltage 24 V DC, 230 V AC
Total connection value approx. 5.8 KW

Space requirement/weight:
Length approx. 2455 mm
Width approx. 1200mm
Height approx. 1650mm
Net mass approx. 2800 kg

Specification:
1 grinding wheel holder with forcing screw
2 pieces center punches
1 piece driver lever
1 piece of machine paneling with sliding doors on the operating side
1 piece automatic shutdown with SIEMENS small SP
1 internal grinding device (bore diameter 12-32mm, bore depth 100mm)
fully inclusive:
– 1 fixed stop for table locking with limitation on both sides
– 1 piece steady rest closed diameter 5-50mm
– 1 swiveling dressing device
– 1 internal grinding spindle SSI 60×250/R incl. 2 screw-in mandrels
– 1 piece of machine documentation cpl.