ROMI E 320-BMY CNC Turning Center – Year 2005
Brand: Romi
Model: E320-BMY
Year: 2005
Approx. Shipping Weight: 19,000 LBS
Approx. Shipping Dimensions: 180″ L x 75″ W x 133″ H
Loading Fee: Rigging Required
Specifications:
Swing Over Z Cover: 27.55″
Cutting Diameter with Standard Tools: 12.59″
Cutting Length: 23.62″
Distance Between Spindle Faces: 41.26″
Spindle Nose: A2-6 / A2-6
Spindle Bore: 2.87″ / 2.87″
Bar Capacity: 2.52″ / 2.01″
Spindle Speed: 4,500 RPM (Both)
Spindle Drive: 25HP (Both)
X-Axis Travels / Feeds: 8.66″ / 945 IPM
Z-Axis Travels / Feeds: 23.82″ / 1181 IPM
Y-Axis Travels / Feeds: 3.94″ (+2.36″ / -1.57″)
Turret Type: Servo / Hydraulic Clamp
Number of Tool Positions: 12 (Live or Static)
Tool Selection: Bi-Directional
Index Time (Next Station): .2 Seconds (Including Unclamp & Clamp)
Driven Tool Speed Range: 5-5000 RPM
Tool Capacity Square/Boring Bar: 1″ / 1.5″
Live Tooling: ER-32
Voltage: Multi Voltage Transformer, also addl transformer pictured
Equipped With:
Live tooling and Y axis, GE-Fanuc 18i-T CNC Control,
Character Engraving System,
CS Contouring Control, Cylindrical Interpolation, Polar Coordinates Interpolation,
Polygon Machining, Tool Setter, Parts Catcher / Conveyor,
Barfeed Interface, LNS Quick Load Servo 65 Barfeeder with Assorted Spindle Liners,
Assorted Live & Static Tooling Including 1 Adjustable Angle Live Head,
100 PSI Coolant System with Separate Pumps for Tooling & Wash Down, Collet Chucks for both Main and Sub Spindles Including Collets for Both and 3-Jaw Chucks for Both Main and Sub Spindles
New touch setter sensors
comes with all romi tool holders pictured on turret and on table, no tooling comes with it (boring bars groove tools etc)
5c sub spindle collet chuck shown on sub does not come with machine, the original 3 jaw chuck and collet chuck for that spindle included as well as the collet chuck and 8″ chuck on the main spindle .. I believe the collet chucks are s20 and s22 chucks with many collets.. If your interested i can look into it further but they are pictured
Very capable lathe, very accurate (holding10ths) mostly cut aluminum with some stainless steel and a little brass
All working and under power
