OKUMA MULTUS B300BB/SBW II – Year 2013
CNC Turning Center with Edge Rebel 102 Barfeeder
| OKUMA MULTUS B300BB/SBW II | CNC Turning Center with Edge Rebel 102 Barfeeder |
| MAXIMUM TURNING DIAMETER | 24.80” |
| DISTANCE BETWEEN SPINDLES | 35.43” |
| SPINDLE NOSE BOTH SPINDLES | A2-8 |
| SPINDLE SPEEDS MAIN AND SUB SPINDLES | 30 – 3,800 RPMS, 45 – 5,000 RPMS |
| BAR CAPACITY MAIN & SUB SPINDLES | 2.75” MAIN, 2.00” SUB-SPINDLE |
| CHUCKS, MAIN & SUB-SPINDLE | ROYAL QUICK-CHANGE 80 & 10” 3-JAW |
| HORSEPOWER, INTREGAL MOTORS | MAIN SPINDLE = 30 HP, SUB = 20 HP |
| TOOL CHANGER CAPACITY | ATC 60 TOOLS, CAPTO C6 TOOLS |
| RAPID TRAVERSE RATES | 1,575 / 1,023 / 787 IPM; X & Z / Y / W |
| X-AXIS TRAVEL | 22.83 (+22.04” / – 0.79”) |
| Z-AXIS TRAVEL | 36.81” |
| Y-AXIS TRAVEL | 6.30 INCHES (+3.15” / – 3.15”) |
| W-AXIS TRAVEL | 36.81” |
| C-AXIS TRAVEL, MAIN & SUB SPINDLE | 360 DEGREES, WITH DISK BRAKE |
| H1 SPINDLE TAPER | CAPTO C6 |
| H1 SPINDLE RANGE | 50 – 10,000 RPMS |
| H1 SPINDLE MOTOR | 15/10 HP PREX MILLING MOTOR |
| MAXIMUM TOOL LENGTH & WEIGHT | 11.81”, 17.76 LBS |
| MAXIMUM M TOOL DIAMETER | 3.54”/5.12” IF NO ADJACENT TOOL |
| TOOL SETTER | AUTOMATIC, SERVO DRIVEN |
| AUTO GAUGING | RENISHAW RMP60, CAPTO C6 |
| CNC CONTROL | OKUMA OSP-P300S |
| COLLISION AVOIDANCE SYSTEM | INCLUDED |
| TAS-S & TAS-C THERMAL COMP | INCLUDED |
| SYNCHRONIZED TAPPING | H1 TURRET |
| HIGH PRECISION C-AXIS BB MAIN | INCLUDED |
| HIGH PRESSURE COOLANT | MP 1,000 P.S.I, INCLUDED |
| AIR THROUGH THE SPINDLE | INCLUDED |
| PARTS CATCHER/SUB-SPINDLE | INCLUDED |
| BARFEEDER INTERFACE | UNIVERSAL TYPE |
| MIST COLLECTOR & COOLANT FILTRATION | INCLUDED |
| CHIP CONVEYOR | WITH FINE FILTRATION, INCLUDED |
| MACHINE DIMENSIONS | 193” X 101” X 120”H, 34,100 LBS |
