MAZAK INTEGREX 100-IV ST CNC MultiTasking Turn-Mill Center with LNS Bar Feeder – Year 2008
Brand: MAZAK
Model: INTEGREX 100-IV ST
Year: 2008
Specs:
Chuck (main / sub): 6″ / 6″ Hydraulic
Maximum Swing: 21.46″
Max Swing using Y Axis: 16.22″ – 21.46″
Maximum Swing Over Cross Slide: 13.86″
Max Swing over lower Turret: 15.75″
Max Cutting Dia: Chucking: 21.46″ Upper
Maximum Machining Length: 29.65″
Max Distance between Chuck Faces: 28.9″
Spindle Nose / Spindle Bore / Bar Cap: A2-5 / 2.4″ / 1.65″
Main Spindle Speed: 6,000 rpm
Spindle Index (degrees) C Axis: 0.0001 degree
Spindle HP: 10 / 15 HP AC
Sub Spindle Nose / Bore: A2-5 / 2.4″
Sub Spindle Speed: 6,000 rpm
Sub Spindle Index: 0.001 degree
Sub Spindle HP: 10 / 15 HP AC
Upper Turret: 1 pos. w/ ATC
Magazine Capacity: 40 Positions – CAT40
Rotary Tool Spindle HP / Speed: 7.5 HP / 12,000 RPM
Lower Turret: Drum Type
Lower Turret Positions: 9 Position Turret
B-Axis Travel – Pendulum Head: 225 Degrees
Y Axis Travels: +/- 2.75″
X Axis Travel: 16.14″
Z Axis Travel: 31.69″
X2 Axis Lower: 8.66″
Z2 Axis Lower: 30.71″
W Axis Travel – Subspindle: 31.3″
Machine Dimensions: 121.06″ x 91.73″ x 88.3″
Machine Weight: 18,078 lbs
Options:
Mazatrol Matrix
Y Axis
Sub Spindle
Pendulum Style B Turret
9 Station Lower Turret
C Axis 0.0001 Degree Increment
Live Milling
40 Station Tool Magizine (CAT40)
ATLM
Automatic Parts Catcher
Mayfran Chip Conveyor
EIA/ISO Input Function
Milling Spindle Synchronous Tapping
Cardbus I/F (2 Slots)
USP Port Interface
LNS Barfeeder
MAZAK Integrex 100-IV ST “Done in One” advanced CNC Lathe / Mill.
This is an excellent machine design for making complex parts WITHOUT human interface. Mazak calls it “Done in One”. We have made parts on this type machine that were NET finished, dropped into machine’s parts catcher.
Integrex machine design allows parts making WITHOUT any hard fixturing! Material is held in turning spindle either up to the 1 5/8 inch thru spindle bar diameter or “slugs” held in turning spindle chuck then handed off to 2nd spindle for back side finishing.
Advanced “Matrix” CNC Control with Mazatrol “Conversational” programming and EIA programming. Simple USB program and tool data backup / transfer. Internet remote operation monitoring.
12,000 rpm 25 HP Milling “B” axis spindle w/ 225 degree rotation (active contouring)
5,000 rpm C1 30 HP & C2 25 HP Turning Spindles, 0.0001 degree indexing (active contouring)
Options:
40 Tool Magazine, CAT40 (Tool holders specific for this machine included)
Lower Turret with 9 stations
Parts Catcher
LNS Bar Feeder, over 1 5/8 inch material capacity (atleast)
Plummed for 1,000 psi thru mill spindle high pressure coolant (pump not included)
Wired for Reneshaw Touch Probe (probe not included)
“ConSep” 2000II Chip Conveyor w/ Drum Style Coolant Filtration
