Makino D200Z CNC 5-Axis Vertical Machining Center – Year 2019
MAKINO D200Z
SPECIFICATIONS:
X-Axis……………. 13.78″
Y-Axis……………. 11.81″
Z-Axis……………. 9.83″
Table Dia…………. 11.81″
B-axis……………. 180 Degrees
C-axis……………. 360 Degrees
# Axis……………. 5
Spindle Speed……… 30,000 RPM
ATC Capacity………. 42
Taper…………….. HSK-E50
Table Load Capacity… 164.99 lb
Control…………… CNC (Professional 6 (Fanuc) CNC Control)
Equipped With
EQUIPPED WITH:
Makino Pro 6 5-axis CNC Control
Makinos proprietary SGI.5 motion control software
Integrated Erowa Work Holding Fixture
DD motors with clamps on B & C axis
Blum Laser Probe
Chip Conveyor
Core Cooled Ballscrews
Automatic Spindle Lubricant Temperature Controller
HSK E50 Heat Shrink Tool Holders Included
REGO-FIX POWRGRIP TOOL SETTING MACHINE
TOOLING AND FIXTURES
Standard Features:
Twenty – One (21) Tool Magazine
30,000 rpm, 2 range, HSK–E50 Spindle
Automatic Spindle Lubricant Temperature Controller
Tilt-Trunion Table (B & C axes)
Integral Erowa Chuck & Pallet
Machine temperature control:
“Core Cooled” Ballscrews
Support bearing & drive motor
A & C Axes DD Motors
Automatic Lubrication Supply Unit
Base Coolant
Nozzle Coolant
Through Spindle Air
Rear Discharge LUCC
Splash and Chip Shield
Makino Professional 6 Control
Makino Proprietary Super Geometric Intelligence SGI.5 Software
Laser ATLM
AWMS (with center of rotation software)
Five Axis Software:
TCP – Tool Center Point Control
DFO – Rotary Table Dynamic Fixture Offset
TWP – Tilted Work Plane Command
Three Dimensional Cutter Compensation
Inversed Time Function
Program Restart
3-Dimensional Manual Feed;
Spindle-Table Interference Prevention Function
Collision Safeguard
Custom Macro (1,100 variables)
Helical Interpolation
Portable MPG
Air Dryer
Maintenance Advice System
Inch/Metric Selection
Worklight
Programming Data Input (G10)
Spindle Load Display
Spindle Load Monitoring
Tool Life Management
Direct Spare Tool Selection
Dual Safety Check
Signal Light (3 layer)
The Makino D200Z 5-axis vertical machining center conquers the complexities of multifaceted, contoured 3-D geometries with precision, full 5-axis machining capabilities. Its high-precision, high-speed motion control technologies enable manufacturers to maintain the tightest accuracy and quality requirements even during simultaneous 5-axis motion.
Designed with an integral chuck to maximize work-zone volume and load capacity, the D200Z accommodates workpiece sizes up to 300mm in diameter and 210mm tall with weight up to 75 kg. The X, Y and Z axes (350mm, 300mm and 250mm travels, respectively) provide swift movement with rapid traverse and cutting feed rates of 60m/min. The D200Z has also adopted a unique, lightweight B-axis tilting structure with 180 degrees (0 to +180) of tilt capability at 100 rpm. Both the B-axis and rotational C-axis (360 degrees continuous at 150 rpm) feature direct-drive motors for agile, accurate, high-speed, responsive angular and rotational operation.
Wide base castings and core-cooled ball screws serve as a base platform for all other machine components, enhancing overall process stability. The machine’s 30,000-rpm, HSK-E50 spindle is designed with a high-tech spindle core and jacket cooling system to tightly control thermal growth, deflection, and vibration during high-speed machining operations. As a result, the D200Z extends tool life and has exceptional surface finishes even in applications requiring fine tool blends and matches. Production Year 2019; 460 VAC; 3Phase/60HZ.
With flexible tool capacities and automation capabilities, such as the 100-tool-capacity automatic tool changer (ATC) and multiple pallet system, the D200Z can achieve utilization rates of more than 80% for the highest level of throughput and fastest return on investment.
