LINCOLN ELECTRIC Sub Arc Welder
SAW MANIPULATOR PACKAGE
FEATURES:
* STROKE (V X H): 3.5 M X 3.5 M (11.4 FT. X 11.4 FT.)
* BOOM HORIZONTAL SPEED RANGE: 150 TO 3,000 MM/MIN (5.9 TO 118.1 IPM)
* BOOM LIFT SPEED, FIXED SPEED: 1140MM/MIN (44.9 IPM)
* LINEAR BEARINGS GUIDES FOR SMOOTH BOOM HORIZONTAL AND VERTICAL BOOM MOVEMENTS
* SAFETY FEATURES INCLUDES FIXED MECHANICAL STOPS, AND OVER-TRAVEL PROTECTION LIMIT
SWITCHES
* BOOM DRIVE ACTUATOR: GEAR RACK & PINION GEAR
* CHAIN OR BALL SCREW DRIVE FOR BOOM UP/DOWN MOTION*
* COLUMN ROTATION: +/-180 DEG. ROTATIONAL BASE ASSEMBLY, MANUALLY ROTATED
* FREE STANDING BASE ASSEMBLY
* CONTROL WITH HAND PENDANT FOR UP/DOWN AND IN/OUT MOTION
* INPUT POWER: 460/3/60
** CABLE CARRIER FOR BOOM & COLUMN
** NA-5 AUTOMATIC WIRE FEEDER CONTROL
** NA-5S WIRE DRIVE
** SUBMERGED ARC CONTACT NOZZLE ASSEMBLY
** CABLES (CONTROLLER TO POWER SOURCE)
** CABLES (CONTROLLER TO WIRE FEEDER)
** CABLES (WELD POWER CABLES)
** K162-1 SPINDLE ADAPTER FOR READI-REELS AND SPOOLS
** K1504-1 50-60 LB COIL ADAPTER
** POWERED CROSS SLIDES
** FLUX RECOVERY SYSTEM WITH AUTOMATIC FLUX DISCHARGE – ADW-1003
** 1-½” FLUX RECOVERY HOSE 5FT – ADW-1346
** STANDARD FLUX PICK UP NOZZLE – ADW-1098
** LINEAR & ANGULAR HOSE MOUNTING BRACKET – ADW-1096
** REMOTE VIEWING CAMERA PACKAGE
** ST250-5×5 STANDARD SEAM TRACKING ASSEMBLY ONE-PAK®
POWER WAVE AC/DC 1000 SD
* CONSISTENT OPERATION OVER ± 10% INPUT VOLTAGE VARIATION THROUGH BUILT-IN LINE VOLTAGE
COMPENSATION AND RELIABLE INPUT VOLTAGE CONNECTION.
* PROCESSES: DC+ SUBMERGED ARC, DC- SUBMERGED ARC, BALANCED AC SUBMERGED ARC, VARIABLE
AC SUBMERGED ARC
* INPUT POWER: 380/400/460/500/575/3/50/60
** MAXSA 22 FEED HEAD
* FLEXIBLE CONFIGURATION – CAN BE USED IN SINGLE, TANDEM, TWINARC® OR MULTIPLE ARC
APPLICATIONS.
* CLOSED LOOP SPEED CONTROL – FACILITATES FULL CONTROL OVER STARTING, RUNNING AND
STOPPING WIRE FEED SPEED.
* IP23 RATED – TESTED TO WITHSTAND HARSH ENVIRONMENTS.
* STANDARD CONVERSION KITS – USED TO CHANGE THE SPEED RATIO TO MATCH THE REQUIREMENTS
OF YOUR APPLICATION.
* MULTI-AXIS ROTATION – ROTATIONAL FEED HEAD ADJUSTMENT IN TWO PLANES ALLOWS FLEXIBLE,
ACCURATE SETUP FOR FIXTURING OR ARC LOCATING.
* ADDITIONAL POSITIONING FLEXIBILITY CAN BE ACHIEVED WITH OPTIONAL HORIZONTAL AND
VERTICAL LIFT ADJUSTERS.
* STANDARD ACCESSORIES – INCLUDING AN ADJUSTABLE WIRE STRAIGHTENER, CROSS-SEAM ADJUSTER
AND ELECTRICAL VALVE FLUX HOPPER
** MAXSA 10 CONTROLLER
* THE MAXSA® 10 CONTROLLER OFFERS A SINGLE MONITORING AND CONTROL POINT FOR THE ENTIRE
HARD AUTOMATION WELDING SYSTEM. OPERATORS HAVE FULL CONTROL OVER AC AND DC WELDING
PARAMETERS AND EASY PLC INTERFACING TO CONTROL FIXTURE TRAVEL, TIMERS AND OTHER SYSTEM
COMMANDS.
* SEVERE DUTY READY – THE CONTROLLER IS IP23 RATED AND READY FOR OPERATION IN HARSH
ENVIRONMENTS.
* PENDANT BOX – MOUNT THE CONTROLLER IN THE STANDARD PROTECTIVE BOX OR REMOVE THE
PENDANT FOR HAND-HELD OPERATION. EXTEND HAND-HELD OPERATION FROM 4 FEET (1.2 M) UP TO
100 FEET (30.5 M) WITH AN ARCLINK® EXTENSION CABLE.
* EIGHT PROCEDURE MEMORIES – PRE-SET AND SAVE YOUR OPTIMAL WELDING PARAMETERS FOR
REPEATING APPLICATIONS AND RECALL LATER FOR FAST CHANGEOVERS.
