Hurco VM20i CNC Vertical Machining Center – Year 2017
An immaculate, 2017 built and lightly used Hurco VM20i with single wide screen Hurco Control.
Machine is fitted with a Hurco 200mm 4th Axis Table and tailstock, 10,000 RPM Cat 40 spindle, swarf conveyor and a full suit of tool holders, rigid tapping & Ultipocket options are enabled.
Spindle run hours are only 5700 hours and has full Hurco service history.
Specification:
10,000 RPM spindle, 20 tool side mount ATC, swarf conveyor, DFX file reader,
Table Specs:
X, Y, Z Axis Travel: 40 x 20 x 20 inches (1016 x 508 x 508 mm)
Table Size: 46 x 20 inches (1168 x 508 mm)
Max. Weight on Table: 3970 lbs (1800 kg)
Spindle Nose to Table Min/Max: 4.0 / 24 inches (102 / 610 mm)
T-Slot Size: 5 x 0.71 inches (5 x 18 mm)
Spindle:
Max. Spindle Speed: 10,000 rpm
Spindle Power (peak – 1 min): 20 hp (15.0 kW)
Spindle Torque (peak – 1 min): 75 ft-lbs @ 1450 rpm (102 Nm @ 1450 rpm)
Tool Changer:
Tool Type: CAT 40 / Big Plus®
Number of Tools: 20
Max Tool Diameter: 3.1 inches (80 mm)
Max Tool Length: 9.8 inches (250 mm)
Max Tool Weight: 15.4 lbs (7 kg)
Feedrates:
Rapid Traverse X, Y, Z Axis:
1102 inches/min (28 m/minute)
Max Programmable Feedrate: 1102 inches/minute (25.5 m/minute)
Size:
Max Operating Floor Space:
145.8 x 118.4 inches (3703 x 3007 mm)
Machine Height: 101.5 inches (2576 mm)
Machine Weight: 9,039 lbs (4100 kg)
