HITACHI SEIKI Hi Cell 23 – Year 1996
CNC Lathe with Y-axis capabilities

Hitachi Seiki Model HiCell CA-23 CNC “Y” Axis Mill/Drill Turning Center

complete with Seiki “Seicos L-III” 32 Bit CNC Control featuring a G-Code

programming format with the following machine specifications:

(Includes tool path graphics in control)

¨ Travels: “X” Axis – 8.5″ , “Y” Axis – 4.0″, “Z” – 20.9″

¨ 12 Station Automatic Tool changer – Double Arm

¨ 10″ 3 jaw Factory installed chuck

¨ 2.6″ Bar Capacity thru Hydraulic Chuck

¨ 3.1″ Hole Thru Spindle (2.6″ Bar Capacity thru Standard Chuck)

¨ A2-8 Spindle Nose with Class #9 Spindle Bearings

¨ 15/20 H.P. Wide Range Spindle Motor ( 50% E.D )

¨ 20 – 3600 RPM Spindle Speed – Full H.P. at 360 R.P.M

¨ 945″ I.P.M Rapid Traverse “Z” Axis

¨ 394″ I.P.M Rapid Traverse “Y” Axis

¨ 787″ I.P.M Rapid Traverse “X” Axis

¨ 33.3 R.P.M. on “C” Axis

¨ 0 – 2,000 Deg/Min “C” Axis ( 0.0001 – 19.685 I.P.R. )

¨ 10 Station Quick Change KV Mill/Drill machining Turret

¨ 5 H.P. Rotary Milling Tool Stations – ( Qty-5 )

¨ Q- Setter (Tool Length/Diameter Presetter)

¨ One Touch Programmable Tailstock

¨ “X” Axis Ball Clutch Protection

¨ “Z” Axis Ball Clutch Protection

¨ distance between centers 26.5″

¨ .08 Second Turret Index / Face

¨ Total of Five (5) Power Tool Stations on Turret

¨ Coolant Thru the Turret and Tooling & chip washdown on tailstock

¨ 99 Tool Offsets

¨ Run Hour Display – Part Cycle Time

¨ graphics “Real Time Display”

¨ Main Spindle RPM & Load Indicators

¨ Live Tooling RPM & Load Indicators

¨ RS 232 C Interface

¨ Sealed Electrical Cabinet with Heat Exchanger

¨ 80 psi coolant Pump ( Nippon gear type) Coolant thru turret

¨ All Books and manual including back up and data sheets
Machine tool is currently running