HeylIgenstaedt HEYNUMAT 24 U/5000 – Year 1990
| Turning length | 5200 mm |
|---|---|
| Ø above the bed | 450 mm |
| Ø above transversing slide | 800 mm |
| Length between centers | 5000 mm |
| Type of CNC | SINUMERIK 3 T |
| Max workpiece weight | 5000 kg |
| Spindle taper | |
| Spindle bore | 105 mm |
| Turning speed | 2800 rpm |
| Spindle motor power | 71 kW |
| Tailstock | no |
| Bar feeder | no |
| Weight | 22000 kg |
CNC – Controlled Slant-Bed Universal Lathe with Tool Changer
Height of Centres 450 mm
Max. swing Ø above bed 900 mm
Max. swing Ø above slide 800/770 mm
Distance between centres 5.000 mm
Spindle bore 105 mm
Carriage travel longitudinal / cross 5.200 / 500 mm
Y-Axis in Toolslide +/- 5 mm
Spindle speeds, 2 steps, infinitely variable 11.2 – 2.800 rpm (!)
Longitudinal and facing feeds, infinitely variable 0,5 – 5.000 mm/Min.
Quick feeds, longitudinal / cross 10.000 mm/Min.
Feed Force long./cross 16.000 / 10 000 N
Max.weight of workpiece between centres w/wo steadies 5000/4000 kg
Spindle drive 45/71 kW
Total electrical load approx 85 kW – 380 V – 50 Hz
Weight, approx. 22.000 kg
Accessories / Special Features:
SIEMENS – CNC – Control for X-Z-C-Y—Axis, Model SINUMERIK 3 T with Monitor,
The appropriate software is available. Control-Panel is built-in the Front Sliding Door.
Equipped with an automatic Tool Changing System Model WSW with 12-Station Tool Magazine
and 2 station Tool Turret, with live tools driven by a 8 kW – Motor. Also approx. 40 various tool holders
some for live tooling
Hydraulic 3-Jaw Power Chuck make KNCS N 630 with Ø 630 mm (quite new) and a SMW Chuck
with 400 mm Ø, both with several jaws.
Two slides mounted on the lower guideways to mount the hydraulic 3 point steady rests ,
4 steadyrests available for various diameters Ø range approx. 150 to 300 mm
Heavy Duty Tailstock with quill Ø 160 mm and quill stroke 160 mm
Completely covered Working area with 2 movable sliding doors also in order for an easy loading of
Workpieces from above.
Large Chip Conveyor mounted length to turning axis in the middle of the machine.
Separate coolant device
Separate Hydraulic unit and separate switch Cabinet
