Gleason Model 106 Hypoid Gear Generator
Machine SPECIFICATIONS
| Gleason Model 106 | Hypoid Gear Generator |
|---|---|
| Cone Distance Max (30″ Spiral Angle & 7-1/2″ Cutter) | 4-1/4″ |
| Gear Pitch Diameter Max | 10 to 1 |
| 10 to 1 Ratio | 8 – 1/2″ |
| 2 to 1 Ratio | 7 – 1/2″ |
| 1 to 1 Ratio | 6″ |
| Diametral Pitch (Coarsest) | 4 |
| Full Depth Max | .625″ |
| Face Width Max | 1 – 1/4″ |
| Number of Teeth | 5 to 150 |
| WORK SPINDLE | : |
| Diameter of Taper Hole at Large End | 3 – 29/32″ |
| Taper per Foot | 89/64″ |
| Depth of Taper | 6″ |
| Diameter of Hole Through Spindle | 2 – 7/16″ |
| Diameter of Spindle Nose | 5 – 11/82″ |
| Cutter Diameter | 3 – 1/2″, 4 – 1/2″, 5″, 6″, 7 – 1/2″ |
| WORK HEAD | : |
| Offset Above Center Max | 8″ |
| Offset Below Center Max | 8″ |
| Distance from Machine Center to Nose of Spindle Max | 9″ |
| Distance from Machine Center to Nose of Spindle Minimum | 1 – 1/4″ |
| Cutter Speeds | 54 – 418 RPM |
| Feeds (seconds per tooth) | 5 – 73 seconds |
| Feed Motor | 5 HP, 1800 RPM |
| Hydraulic Motor | 1 HP, 1800 RPM |
| Coolant Motor | 1/2 HP, 8600 RPM |
| Floor Space | 84″ x 61″ |
| Net Weight | 15,500 lbs |
|
EQUIPPED WITH: Completer with Helical Motion and Roll Centering. Hydraulic Chucking. Change Gears. Automatic Stop Counter. Stock Divider. Coolant with Magnetic Chip Separator. Drawings. |
|
