Description
Gleason Model 106 Hypoid Gear Generator
Machine SPECIFICATIONS
Gleason Model 106 | Hypoid Gear Generator |
---|---|
Cone Distance Max (30″ Spiral Angle & 7-1/2″ Cutter) | 4-1/4″ |
Gear Pitch Diameter Max | 10 to 1 |
10 to 1 Ratio | 8 – 1/2″ |
2 to 1 Ratio | 7 – 1/2″ |
1 to 1 Ratio | 6″ |
Diametral Pitch (Coarsest) | 4 |
Full Depth Max | .625″ |
Face Width Max | 1 – 1/4″ |
Number of Teeth | 5 to 150 |
WORK SPINDLE | : |
Diameter of Taper Hole at Large End | 3 – 29/32″ |
Taper per Foot | 89/64″ |
Depth of Taper | 6″ |
Diameter of Hole Through Spindle | 2 – 7/16″ |
Diameter of Spindle Nose | 5 – 11/82″ |
Cutter Diameter | 3 – 1/2″, 4 – 1/2″, 5″, 6″, 7 – 1/2″ |
WORK HEAD | : |
Offset Above Center Max | 8″ |
Offset Below Center Max | 8″ |
Distance from Machine Center to Nose of Spindle Max | 9″ |
Distance from Machine Center to Nose of Spindle Minimum | 1 – 1/4″ |
Cutter Speeds | 54 – 418 RPM |
Feeds (seconds per tooth) | 5 – 73 seconds |
Feed Motor | 5 HP, 1800 RPM |
Hydraulic Motor | 1 HP, 1800 RPM |
Coolant Motor | 1/2 HP, 8600 RPM |
Floor Space | 84″ x 61″ |
Net Weight | 15,500 lbs |
EQUIPPED WITH: Completer with Helical Motion and Roll Centering. Hydraulic Chucking. Change Gears. Automatic Stop Counter. Stock Divider. Coolant with Magnetic Chip Separator. Drawings. |