Brand: FMB
Model: TURBO
Year: 2015
Specs:
FMB TURBO 2-20 Swiss Bar Feeder
Bar diameter capacity-no bar preparation: 2 mm to 20 mm (.078” to .787”)
Bar diameter capacity-with bar preparation: 2 mm to 23 mm (.078” to .905”)
Maximum bar length: 3800 mm (12 feet 5 inches)
Minimum bar length: 1000 mm (39.400”)
Maximum remnant length: 420 mm (16.540”)
Magazine rack capacity: 7”
Bar loading cycle time: 30 seconds for 12 foot bar
Material straightness specification: .007” TIR/foot of material (V blocks, 3 points equidistant)
Feed force (pusher torque): max 300 N, adjustable
Forward feed rate: 710 inches/minute max, adjustable
Return feed rate: 1420 inches/ minute max, adjustable
Power consumption: 1.5 kW – (2 kVA)
Operating voltage: 230V/60Hz 3-phase
Control voltage: 24V DC
Oil capacity: 50 liters (13.2 gallons)
Oil viscosity: ISO 100 cST
Compressed air supply: 6 bar (90 psi)
Compressed air consumption: approx. 3 liters per loading cycle
Machine weight (without oil): 1,650 lbs
Automatic loading magazine — 7 linear inches of rack capacity
Double pusher, space saving design
Quick-change polyurethane guide channel system – noise & vibration dampening
Hydrodynamic support via high volume oil flow into channels
Omron motion control — dependable and user friendly, allows easy bar feeder parameter changes
Bearing block steady rest. Super rigid design is mounted to base of the machine to provide maximum support of bar stock and pusher
Separate floor mounted electric cabinet isolates electronics from vibration
(1) Guide channel set to be chosen by customer. Several sizes to choose from, each handling a specific stock range. See chart on next page. (spindle liner required if channel set is not lathe’s max capacity)
(1) Universal telescoping front nose and (1) nose I.D. liner specific to pusher
(1) O.D. bar stock collet (to be chosen by customer, specific collet needed for each stock diameter)
Swiss headstock synchronization device
Automatic remnant retraction, self centering gripper
Custom lathe cable and interface plugs
Polyurethane bushing blocks (2 pieces)
