DAVIS KEYSEATER Model 15 – Year 1971
Keyseater Machine

Capacity in Steel: 1/16″ to 1-1/2″ Wide
Throat Depth from Face of Cutter Arm Post: 19″
Maximum Work Height from Table Surface: 12″
*Throat Depth of 22″ & Work Height of 18″ Can be Had
with Special Parts from Manufacturer
Maximum Length of Cut with 3/4″ High Pushing Plate:
16″ Long Cutter = 4″ 24″ Long Cutter = 12″
20″ Long Cutter = 8″ 30″ Long Cutter = 18″
Table Size: 20″ x 31″ with (3) T-Slots & Coolant Trough
Table Movement: 1-1/2″
Cutter Stroke: 4-1/2″
Cutter Strokes Per Minute: Approximately 42

EQUIPPED WITH:
Air Operated Table Feed with Adjustable Pressure Control
Micrometer Adjustable Table / Feed Stop
Control Switch for: Job – Hand – Auto Operation
Coolant Switch for: On – Off
Manual Table Movement Via Hand Lever
Large Assortment of Bushings & Plates see list below
(2) Quick Clamps
(2) V-Blocks
2 HP Motor, Wired for 3 Phase, 60 Cycle, 208-220-440 Volt Operation
Presently Wired for 3 Phase, 440 Volts
Coolant Pump & Pan

Overall Size Machine & Components:
Machine: 37″ LR x 56″ FB x 35″ High (With Arm Down) x 1,250 Lbs.

Keyseater Cutters :
Hansford .3105″ x 3/4″ x 1/2″ AF
Hansford .470″ x 1″ x 20″ x 1/2″ AF
Hansford 1/2″ x 20″ AF D-4L15
Hansford .4976″ x 1″ x 20″ x 1/2″ AF
Hansford 7/16″ x 20″ AF D-4238
Hansford 5/8″ x 20″
Davis 3/4″ AFA
Hansford 3/4″ x 20″ AFA D-4220
Hansford 7/8″ x 20″ D-4223
Davis 1 AFA
Hansford 1/4″ x 20″ AF D-407
Hansford 1-1/4″ AFS D-3861
Davis 1-1/2″
Hansford 7/8″ AF D-4225
Davis 1-1/4″
Hansford 7/8″ x 30″ AF D-4225
Hansford 7/8″ x 24″ AF D-4224
Davis 7/8″ AF
Davis 3/4″ AFA
Davis 5/8″ AF
Davis 1/2″ AFA
Hansford 5/16″ x 20″ D-4209
Hansford 3/16″ x 20″
1/4″
Hansford 1/8″ x 16″
Hansford 3/16″ x 16″ D-4204
Hansford 3/8″ x 16″ x 5/16″ AF 3/16″ RD
Hansford 14 mm x 20″ AF D-4318
Hansford 14 mm x 20″ AF D-4316
20 mm 786
Hansford 5 mm x 16″ AF D-4303
Dumont 22 mm Special S-8390
6 mm
8 mm P9
Hansford 8 mm x 20″ AF D-4305
10 mm P9
14 mm
12 mm 4715
18 mm 7085
16 mm 630
15 mm 591