AVIA X-5 1250/630 – Year 2012
CNC 5 Axis Vertical Machining Center
Specification of AVIA X-5 1250/630 5-AXIS CNC machining centre
5 axes (X,Y,Z,C,B)
maximum workpiece weight: 1000 kg
worktable surface (L x W): 1500 x 700 mm
diameter of rotary table: 630 mm
feed rate in the X/Y/Z axes: 1250/700/670 mm
feed rate in the tilting axis B: +/- 115°
feed in rotary axis C: 360°
rapid feed rate in the X/Y/Z axis: 30/30/24 m/min
maximum rotational speed in the tilting axis B: 23 rpm
maximum rotational speed in the rotary axis C: 23 rpm
maximum speed of electro-spindle: 18000 rpm
power of electro-spindle: 35 kW
minimum distance of the spindle from the working table: 90 mm
maximum distance of the spindle from the working table: 760 mm
tool magazine capacity: 40 pcs.
tool change time: 14 sec
maximum tool height: 300 mm
maximum tool diameter: 120 mm
maximum tool weight: 7 kg
accuracy of spatial positioning in axes: ± 0,005 mm
accuracy of spatial positioning in rotary axes: 0,001°
repeatability of positioning: 0,005 mm
main motor power: 25 kW
total power requirement: 65 kVA
voltage: 3x 400 VAC; 50 Hz
machine switch-on time: 29644 h
spindle operating time: 11111 h
programme execution time: 11284 h
controller switch-on time: 6428 h
overall dimensions of the milling machine (L x W x H): 4500 x 3800 x 2900 mm
total weight of the X5 1250/630 machine: 10000 kg
Equipment of the X 5 1250/630 milling machine
CNC controller: HEIDENHAIN iTNC 530
electro-spindle taper: HSK 63A
workpiece probe
tool probe
toolholders
AVIA X-5 1250/630 5-AXIS CNC milling centre built in Poland in 2012, is used for precision machining of workpieces of a weight up to 1000 kg. The numerically controlled vertical rotary head of the machine allows machining workpieces with the most complex shapes in 5 axes (X,Y,Z,C,B). The operation of the vertical rotary head, combined with the high performance electro-spindle operating at max. speed of 18000 rpm, achieves greater machining accuracy and reduction of production cycle time.
The tool magazine of the machine, with a capacity of 40 pieces, performs a quick tool change operation in just 14 seconds. The five-axis machining centre is offered with a wide range of equipment, including a rotary table with a diameter of 630 mm and a HEIDENHAIN iTNC 530 CNC control. The total weight of the CNC milling machine is 10000 kg.
