AFM DEFUM TAE 35 N – Year 2018
CNC Lathe
| Turning length | 490 mm |
| Turning Ø | 470 mm |
| Ø above the bed | 300 mm |
| Length between centers | 490 mm |
| Type of CNC | Sinumerik 828D |
| X-axis | 195 mm |
| Z-axis | 500 mm |
| AFM DEFUM TAE 35 N | |
| Spindle bore | 75 mm |
| Number of turrets | 1 |
| Number of tools on turret | 9 |
| Turning speed | 1500 rpm |
| Spindle motor power | 15 kW |
| Tailstock | yes |
| Bar feeder | no |
| CNC Lathe | |
| Length x width x height | 2650.0 × 1520.0 × 1765.0 |
| Weight | 3500 kg |
Made in Poland
Technical parameters:
– CNC control: SIEMENS SINUMERIK 828
– maximum diameter of the flight over the bed guards: 470 mm
– maximum diameter of the passage over the guides of the cross slide: 330 mm
– maximum turning diameter when using a chuck: 220 mm
– turning length in centers: 490 mm
– maximum weight of the workpiece: 150 kg
Spindle:
– spindle bore diameter: 75 mm
– hole diameter of the drawing pipe: 63 mm
– spindle tip: 140h5 mm
– spindle speed range: up to 5000 rpm
– three-jaw chuck diameter: 210 mm
– maximum torque on the spindle: 105 Nm
Cross support:
– travel in the X axis: 195 mm
– motor torque in the X axis: 11 Nm
– maximum travel speed in the X axis: 30 m / min.
– travel in the Z axis: 500 mm
– motor torque in the Z axis: 11 Nm
– maximum travel speed in the Z axis: 30 m / min.
Tailstock:
– travel along the Z axis: 400 mm
– tip of the quill: Morse taper No. 5
– clamping force of the claw: 70-700 daN
– quill diameter: 80 mm
– quill stroke: 130 mm
main engine:
– power S1/S6: 11/15 kW
– nominal speed: 1500 rpm.
Overall dimensions of the machine tool:
– length: 2650mm
– width: 1520mm
– height: approx. 1765 mm
– machine tool weight: approx. 3500 kg
