← Back to Machine List

Wohlenberg VDF PB4-1600 Boring Lathe 10 Meters – Year 1991

Wohlenberg VDF PB4-1600 Boring Lathe 10 Meters – Year 1991
Specifications:
CAPACITY: MAXIMUM SWING OVER BEDWAYS62.99″
BORING DIAMETER SOLID BORING12.4″
TREPANNING2″ TO 25″
COUNTER BORING WITH PILOT PRE-BORE+ 25″
MAXIMUM BORING DEPTH, Z-AXIS 396″
LENGTH OF BED1,176″
WIDTH OF BED39.37″
MACHINE WEIGHT180,000 LBS
WORK HEADSTOCK: SPEEDS, INFINITELY VARIABLE1.8-355 RPM
SPEED RANGES4 MAIN SPINDLE DIAMETER FRONT BEARING11.81″
MAIN SPINDLE BORE6.4″

MAXIMUM TORQUE, 31 RPM AT 180 HP39,900 FT LBS
MAXIMUM WORKPIECE WEIGHT (1) REST88,000 LBS
MAXIMUM WORKPIECE WEIGHT (2) RESTS110,000 LBS
MAXIMUM WORKPIECE WEIGHT (3) RESTS140,000 LBS
MAIN MOTOR160 HP ELECTRICS460V 3-PH 60 CYCLE

APPROXIMATE FLOOR SPACE (L X W)1260″ X 102″
GUIDE CARRIAGE: FEED RANGE0-120 IPM
RAPID TRAVERSE120 IPM
MAXIMUM FEED PRESSURE22,500 LBS
BORING SLIDE: FEED RANGE0-120 IPM RAPID TRAVERSE120 IPM
MAXIMUM FEED PRESSURE22,500 LBS EQUIPPED WITH: 55.12″ DIAMETER FACE PLATE CHUCK WITH JAWS GIDDINGS & LEWIS 8000 CNC CONTROL
INSTALLED 2000 16.92″ DIAMETER BORING BAR

Want to see machine photos and full commercial details?

View Full Machine Details

Latest Guest Posts

Make the Right Move: Proven Steps to Evaluate a Used, Second-Hand, Surplus, Pre-Owned KAPP NILES KS 2003 Spline Shaft Grinding Machine made in Germany Used Machines For Sale
16/01/2026 • 3 min read

Make the Right Move: Proven Steps to Evaluate a Used, Second-Hand, Surplus, Pre-Owned KAPP NILES KS 2003 Spline Shaft Grinding Machine made in Germany

Below is a practical, step-by-step guide for evaluating a used / second-hand / surplus / pre-owned KAPP NILES KS 2003…

Read Guest Post →
Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan? Used Machines For Sale
15/01/2026 • 3 min read

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan?

here’s insider manufacturing advice on what seasoned buyers consider before purchasing a used / second-hand / pre-owned / surplus Makino…

Read Guest Post →
How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan? Used Machines For Sale
14/01/2026 • 3 min read

How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan?

Here’s a professional, structured guide on how to avoid common pitfalls when buying a pre-owned, second-hand, surplus, or used Mazak…

Read Guest Post →