Tsugami M08SYE-II – Year 2018
| Max. Ø | 280 mm |
|---|---|
| Nbr of spindles | 1 |
| Max. length | 380 mm |
| Type | CNC |
| Nbr of axes | 5 |
| Number of tools | 12 |
| Spindle speed | 4500 rpm |
| Spindle power | 11 kW |
| Length x width x height | 2470.0 × 1850.0 × 1930.0 |
| Weight | 5900 kg |
| Worked hours | 1074 hours |
| Hours under power | 2654 hours |
| State | like new |
Tsugami turning center model M08SYE-II; Fanuc 0iTD control included with the IEMCA barfeeder
In addition, the price of the machine offers the complete set of tool holders and holders visible in the photo, allowing you to immediately start working on the machine.
The machine and feeder are under the manufacturer’s warranty.
Basic machine parameters:
Maximum turning diameter: ø 280 mm
dia. feed bar p / spindle ø 65 mm
turning length: 380 mm
Production year: 2018
Axle travels:
in the X axis: 221 mm
in the Z axis: 400 mm
in the Y axis: 100 mm (+/- 50 mm)
in the W axis (intercept): 506 mm
on the C1 / C2 axis: 360 ° (every 0.001 °)
Main spindle:
rotational speed: 4500 rpm
Spindle nose: JIS A2-6
Front bearing diameter: ø100 mm
Spindle bore diameter: ø 73 mm
Engine power (30min / constant): 11 / 7.5 kW
Intercepting spindle:
rotational speed: 4500 rpm
Spindle nose: flat, ø140 mm
Front bearing diameter: ø 80 mm
Spindle bore diameter: ø 59 mm
Engine power (30min / constant): 7.5 / 5.5 kW
Tool head:
Head type: M-V12 NC, radial alignment
Number of tools: L / M: 12, each driven position
Tool shaft height: 25 mm
Shaft diameter: ø40 mm
rotation speed tool drive: 5000 rpm
Engine power of driven tools: 3.7 kW
Torque of driven tools: 23.5 / 14 Nm (15 min / 30min)
Axis travels:
Fast travel:
in the X axis: 24 m / min
in the Z axis: 27 m / min
on the A axis: 30 m / min
in the Y axis: 12 m / min
Axle travel drives:
in the X / Z axis: 1.8 kW
in the Y axis: 1.8 kW
on the A axis: 1.2 kW
In the X / Y axes, widely spaced slide guides with a large rectangular section; in the Z axis roller (roller) guides
Overall dimensions, weight:
Height: 1930 mm
Occupied area: 2470 x 1850 mm
Weight: 5900 kg
Basic machine equipment:
1. Workpiece receiver with workpiece transporter
2. Collet chuck DIN 185E for the main spindle
3. Collet chuck DIN 173E for the counter spindle
4. Turning tool holder (3295-H210) (3 pcs.)
5. Boring holder (3295-H270) (3 pcs.)
6. Boring holder (3295-H280) (3 pcs.)
7. Boring holder (3295-H220) (1)
8. Part cutting off frame (1 piece)
9. Straight driven holder (3295-Y161) – 1 item
10. Reducing sleeve (fi 40/16) (1)
11. Reducing sleeve (fi 40/20) (2 pcs.)
12. Reducing sleeve (fi 40/25) (2 pcs.)
13. Back chip conveyor
14. Tool measuring probe (manually tilted to the measuring position)
15. Foot pedal for left spindle
16. Foot pedal for the right spindle
17. Interface for the bar feeder
18. Signal lamp (3 color)
19. Part ejector from the intercepting spindle
20. RS232C connector
21. Hand rod
22. Dialogue programming system Manual guide i
23. Extended warranty for mechanical components from 12 to 24 months
24. Coolant pump 20 bar
25. Manual handle retrace
26. Helical interpolation
Additional equipment:
1. Axial driven lampholder
2. Angled driven lampholder
IEMCA MASTER bar feeder
Barfeeder MASTER 865/33 MP – 1.0,
Guide channel length L = 33 – PU – (with fore nose) – 3.0,
Bar Pusher D = 25 mm – 1.0,
Bar Pusher D = 42 mm – 1.0,
Bar Pusher D = 65 mm – 1.0,
Revolving tip D = 25 mm – 1.0,
Revolving tip D = 42 mm – 1.0,
Revolving tip D = 65 mm – 1.0,
Liners for lathe with spindle bore 41.0 – 70.9 mm – 2.0,
Bushing holder device – 1.0,
Bushing (D <= 82 mm) for bushing-holder device – 29.0,
Unit price for PRINTED doc. (EU languages) – 1.0
Collet for barstocks from D = 05.00 to D = 09.99 mm – 2.0,
Collet for barstocks from D = 10.00 to D = 14.99 mm – 5.0,
Collet for barstocks from D = 15.00 to D = 19.99 mm – 5.0,
Collet for barstocks from D = 20.00 to D = 24.99 mm – 5.0,
Collet for barstocks from D = 25.00 to D = 29.99 mm – 5.0,
Collet for barstocks from D = 30.00 to D = 34.99 mm – 5.0,
Collet for barstocks from D = 35.00 to D = 39.99 mm – 5.0,
Collet for barstocks from D = 40.00 to D = 44.99 mm – 5.0,
Collet for barstocks from D = 45.00 to D = 49.99 mm – 5.0,
Collet for barstocks from D = 50.00 to D = 54.99 mm – 5.0,
Collet for barstocks from D = 55.00 to D = 59.99 mm – 5.0,
Ejector with outside diameter D = 65.0 mm – 1.0,
The feeder is completely equipped with all available channels and sleeves for all bar diameters, so that you can machine the full range of diameters without buying anything.
