used Tsugami BS-32II – 1998 Model

Year:1998

Control:FANUC LH-1

Maximum bar diameter:1 1/4″

Maximum machining length:9.84″

Maximum main spindle drilling dia.:15/32″

Spindle speed:200 TO 7,000 RPM

Indexing:FULL C-AXIS (.001 DEGREE)

Maximum diameter:1 1/4″

Maximum drill capacity – mild steel:.472″

Maximum tap capacity – mild steel:.393″

Speed range (serial interface):200 TO 6,000 RPM

Power rating:2.7 HP

Sub-spindle indexing:5 DEGREE INCREMENT

Part ejection:FRONT OR REAR EJECTION

Horsepower of main spindle:7.5 HP

Driven tool drive motor rating:1.5 HP

Maximum speed cross tool t10-t12:200-5,000 RPM

Maximum speed cross tool t13:120-3,000 RPM

Number of tool stations:6 OD, 5 ID, 3 ID/OD B/W TOOLS

Tooling sizes, turning:5/8″ SQUARE

Dimensions (apprx):88″ X 60″ X 7’H

Weight (apprx):6000 LBS.

Tsugami BS-32II CNC Swiss Lathe
New: 1998
CONTROL: FANUC LH-1
MAXIMUM BAR DIAMETER: 1 1/4″
MAXIMUM MACHINING LENGTH:9.84″
MAXIMUM MAIN SPINDLE DRILLING DIA. : 15/32″
MAIN SPINDLE:
SPINDLE SPEED: 200 TO 7,000 RPM
INDEXING: FULL C-AXIS (.001 DEGREE)
SUB-SPINDLE SPECIFICATIONS:
MAXIMUM DIAMETER: 1 1/4″
MAXIMUM DRILL CAPACITY – MILD STEEL: .472″
MAXIMUM TAP CAPACITY – MILD STEEL: .393″
SPEED RANGE (SERIAL INTERFACE): 200 TO 6,000 RPM
POWER RATING: 2.7 HP
SUB-SPINDLE INDEXING: 5 DEGREE INCREMENT
PART EJECTION: FRONT OR REAR EJECTION
HORSEPOWER OF MAIN SPINDLE: 7.5 HP
DRIVEN TOOL DRIVE MOTOR RATING: 1.5 HP
MAXIMUM SPEED CROSS TOOL T10-T12: 200-5,000 RPM
MAXIMUM SPEED CROSS TOOL T13: 120-3,000 RPM
NUMBER OF TOOL STATIONS: 6 OD, 5 ID, 3 ID/OD B/W TOOLS
4 CROSS DRIVEN TOOLS, 2 DRIVEN B/W
TOOLING SIZES, TURNING: 5/8″ SQUARE
DIMENSIONS (APPRX): 88″ X 60″ X 7’H
WEIGHT (APPRX): 6000 LBS.
EQUIPPED WITH:
FANUC LH-1 CNC CONTROL
IEMCA BOSS 432/37 MAGAZINE TYPE BAR FEED
PARTS CATCHER