← Back to Machine List

TOSHIBA BSF 34/23A – 1979 Model

TOSHIBA BSF 34/23A – 1979 Model
Floor type boring machine

Milling spindle diameter 340 mm
Boring spindle diameter 230 mm
High-speed spindle diameter 100 mm
Ram section 600 x 700 mm

Milling spindle nose diameter 400 mm
Boring spindle taper ISO No.60 (mm)
Ram travel 1750 mm
Boring spindle travel 1500 mm
Total travel of ram and boring spindle 3250 mm

Headstock vertical travel 5000 mm
Column horizontal travel 13000 mm
Spindle speed 2- 400 rpm
High-speed spindle speed 5-1000 rpm

Feed of ram and boring spindle (NC mode) 1-3600 mm/min
Feed of ram and boring spindle (Manual mode) 2-1600 mm/min (24 steps)
Rapid traverse of ram and boring spindle 4200 mm/min
Feed of headstock and column (NC mode) 1- 3600 mm/min
Feed of headstock and column (Manual mode) 2-1600 mm/min (24 steps)

Rapid traverse of headstock and column 4200 mm/min
Spindle Motor DC 90 kW, 900/2, 600 rpm

Feed motor for boring spindle FANUC model 50 (10 kW)
Feed motor for ram FANUC model 50 (10 kW)
Feed motor for headstock FANUC model 60 H (22 kW)
Feed motor for column FANUC model 60 H (22 kW)

Want to see machine photos and full commercial details?

View Full Machine Details

Latest Guest Posts

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan? Used Machines For Sale
15/01/2026 • 3 min read

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan?

here’s insider manufacturing advice on what seasoned buyers consider before purchasing a used / second-hand / pre-owned / surplus Makino…

Read Guest Post →
How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan? Used Machines For Sale
14/01/2026 • 3 min read

How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan?

Here’s a professional, structured guide on how to avoid common pitfalls when buying a pre-owned, second-hand, surplus, or used Mazak…

Read Guest Post →
How Smart Engineers Assess a Pre-Owned, Used, Second-Hand, Surplus CNC-Takang VMC 1700S – Year 2011 made in Taiwan Before Purchase Used Machines For Sale
13/01/2026 • 4 min read

How Smart Engineers Assess a Pre-Owned, Used, Second-Hand, Surplus CNC-Takang VMC 1700S – Year 2011 made in Taiwan Before Purchase

Below is a professional, detailed guide for engineers and buyers on how to evaluate a pre-owned, used, second-hand, surplus CNC-Takang…

Read Guest Post →