TARUS TPTCGD508SB CNC 4-Axis Heavy-Duty GUN Drill – Year 2012
2″ x 84″ TARUS “TPTCGD508SB” 4-AXIS HEAVY-DUTY CNC GUN DRILL
Model TPTCGD508SB
Installed New 2013,
Serial No TPTCGD2886080423,
EQUIPPED WITH:
TPI-2000 PC Based CNC Control (Control S/N TPTCGDCNC2886423)
Auxiliary Spindle For Milling, Thread Milling, Tapping, Counter Boring & Spot Facing
22.5″ x 38″ Tecnomagnete Electro-Magnetic Chuck w/Controls
Handheld Remote Pendant Controller
Telaflex Way Covers
Tarus High-Pressure Coolant System
Wardcraft Chip Conveyor (Model SHSBB1600-T3, S/N 46105-001)
CATALOG SPECIFICATIONS:
Gun Drilling Diameter, Maximum 2″
Drilling Diameter, Minimum 0.125″
BTA/STS Drillling Diameter, No Pilot 7.5″
BTS/STS Drilling Diameter, w/Pilot 2.22″
Table Dimensions, L x W 96″ x 62″
Table Weight Capacity, Maximum 30000 LBS
Table Travel (X-Axis) 106″
Vertical Head Travel (Y-Axis) 60″
Column Travel In/Out (Z-Axis) 46″
Drill Stroke No Whip Guides, (W-Axis) 93″
Drill Stroke w/(3) Whip Guides (W-Axis) 81.4″
Main Spindle Speeds, Range 0 to 3394 RPM
Auxiliary Spindle Speeds, Range 0 to 3500 RPM
Auxiliary Spindle Taper CAT 50
Auxiliary Spindle Stroke (In/Out) 10″
Main Spindle Horsepower 29.5 HP (22KW)
Auxiliary Spindle Horsepower 29.5 HP (22KW)
NOTE: The Primary Function Of The Tarus Gundrill Is To Drill Holes In Steel
Molds. These Hole Types Can Vary From Coolant Line, Flow Lines, Eye-Bolt
Holes And Clearance Holes. Tarus Gundrills Can Use Both Standard
Gundrills And Single Tube Tooling (BTA/STS Drills). Drilling Up To 2″
Diameter With Gundrills And 1.5″ With Single Tube Tooling. This Machine
Is Also Equipped With An Auxiliary Spindle With It’s Own Spindle Motor
And A Cat 50 Taper. This Spindle Is Used For General Milling, Tapping,
Spot Facing, Counter Boring, Thread Milling And Conventional Drilling.
