Supertec G38P-150CNC – Year 2020
Condition:new
Note:PHOTO SHOWS G30A-50CNC MODEL
Wide selection of optional equipment:including an automatic OD
Swing over table:15″
Distance between centers:60″
Max. grinding diameter:14″
Max. load between centers:330 lbs
Diameter x width x bore:18″x 2″x 6″
Wheel speed:1390 rpm
Max. peripheral speed:109 ft/sec
Sliding angle:90 degrees
Automatic rapid traverse:393 in/min
Infeed travel:9″
Min. increment infeed:0.000010″
Center taper:MT4 (option MT5)
Spindle speed (variable):30~350 rpm
Spindle type:Fixed & Rotary
Diameter of bore:0.91″
Spindle speed:12000/18000 rpm (std.) or 25000 rpm (opt.)
Max. grinding bore:1.18″-3.94″ or 0.79″ – 1.97″
Max. grinding length:4.33″ or 2.17″
Max. chucking length:8″ ~ 12.4″
Max. chucking diameter:6″
Rapid feederate:0-393 in/min
Min. increment feed:0.0001″
Wheel spindle motor:7.5 HP
Workhead motor:2 HP
Hydraulic pump:2 HP
Lubrication pump:.25 HP
Coolant pump:.25 HP
Wheelhead (x axis) motor [fanuc]:0.8 HP
Table (z axis) motor [fanuc]:0.8 HP
Net weight (semi-enclosed):11960 lbs
Gross weight including packing:13060 lbs
Packing dimension:209″x 85″x 89″(L x W x H)
NEW SUPERTEC CNC UNIVERSAL CYLINDRICAL GRINDER
15″ x 60″ MODEL G38P-150CNC w/Straight Wheelhead
NOTE: PHOTO SHOWS G30A-50CNC MODEL
FEATURES:
FANUC Oi-TC CNC control, Fanuc AC drives and servo motors,
with 2 year Fanuc warranty.
Heavily ribbed box-type base is made of Meehanite
castings, providing excellent rigidity to ensure machine
stability.
Table is fully supported in the full travel to avoid overhang.
Hydraulics, coolant and lubrication systems are separated
from machine to eliminate vibration and dissipate heat.
Generously proportioned, the enlarged and properly sloped
drainage troughs underneath the wheelhead base provides rapid
coolant drainage needed during heavy duty grinding and prevents
thermal distortion of base.
giving variable spindle speeds. Workhead swivels 90°CCW to 30°CW
for various grinding operations. A dual oil seal and cover
prevents coolant seepage into the workhead.
The design of the tailstock is both rigid and robust. Housed
