Starrag Heckert MISSION HX 151/24 – Year 2000
Technical characteristics of the machines
Workspace
along (x-axis) 1200 mm
transverse (Y-axis) 390mm
vertical (Z-axis) 300 mm
Round drive station (A-axis) endless
Swing angle (B-axis) +/- 80 °
2.3.2 Clamping possibility
Blade length max.700 mm
Resonant circuit diameter max. 300 mm
axis feedrates
Machining feed / rapid traverse
X max 10 m / min – 25 m / min
Hmooznj
Y max 10 m / min – 25 m / min
Z max 10 m / min – 25 m / min
A max 120 rpm – 120 m / min
B max 30 rpm / 25 m / min
Starrag Heckert Mission HX 151/24
Absolute top prize! The system was revised for 17,000 SFr (about 15,000 €) Year 2009
Year of construction: 2000
The plant HX
With the introduction of the HX MISSION, Starrag has succeeded in setting new standards in the field of blade machining, both technologically and economically. The aim of the development was to use HSC technology for the first time for the rational production of turbomachinery blading.
The machining of blades without length restriction requires for collision reasons a completely new machine concept. Thus, unlike conventional solutions, the HX MISSION performs the pivoting movements, not just the workpiece. To avoid unnecessary compensatory movements, the pivot point was placed in the tool tip. This was possible thanks to the patented by Starrag B-axis
Products Applications
The HX-151 machines are designed as 5-axis centers specifically for the machining of turbine blades. They allow processing at medium to very high cutting speeds and very high feed values. HX-151/24 can be used for roughing and finishing work. The simple position measuring system is assigned by default.
Starrag Heckert MISSION HX 151/24 – Year 2000
