STAMA MC 535 SM – Year 2000
| Axis X | 800 mm |
|---|---|
| Axis Y | 500 mm |
| Axis Z | 510 mm |
| Type | Vertical |
| CNC | FANUC 16iM |
| Table length | 80 mm |
| Table width | 800 mm |
| Number of tool pockets | 66 |
| Max. spindle speed | 10000 rpm |
| Spindle motor power | 32 kW |
| Weight | 10000 kg |
S T A M A
CNC-controlled Vertical Machining Centre for Bar Machining for 5 axis machining of complicated forms in all angle positions with the highest productivity and precision
Model MC 535 SM Year 2000
Bar-Ø/profile size x maximum length 80 x 800 mm (!)
Longitudinal travelling range X-axis 800 mm
Transverse travelling range Y-axis 500 mm
Vertical range of milling heads Z-axis 510 mm
work piece axis turning/swiveling 360°/120 °
Daylight underneath vertical spindle approx. 350 mm
Spindle taper 63 hollow shank tapers
Speed in rpm of spindle infinitely adjustable 36.-.10.000 rpm
Feed of all 3 axes 1 – 10.000 mm/min
Rapid feed 40.000 mm/min
Spindle drive 22 bis 32 kW
Total electrical load 60 kW – 380 V – 50Hz
Weight approx. 10 ton
Accessories/Special Features:
CNC-Continuous path control FANUC Type 16 iM, for all 5 axes including monitor display and direct in-put and various sub-programs, tool corrections, tool monitoring, parallel programming, 3-D and helicoid interpolation, and various other equipment
Bar feeding magazine on the left side of machine up to 10 bars of Ø 80mm,
mounted CNC-Turning-Swivelling system including clamping device for take up of bar materials in connection with hydr. tailstock as center support , automatic tool magazine including 66 tool positions, Ø 125 x 300 long, tools also with internal coolant supply,
including own tool data base, chip to chip time 4 sec. Controlling of tool breakage
via laser-light barrier, etc. · Grip and swivel device for holding the workpiece while cut-off-milling as well as for extracting the finished part and placing it on the conveyor belt
Complete enclosure of work area including chip conveyor, however without coolant facility (central cooling supply) Probe sensor control for scanning workpieces possible, watercooled milling spindle, various collets, no tools available
Condition: good to very good – can be shown in operation soon, very solid machine –
ideal for the production of cutting tool holders
