Muratec MW 120 GT – Year 2012
| Type of CNC | Fanuc 31i |
| Max workpiece weight | 3 kg |
| Muratec MW 120 GT – 2012 Model | |
| Turning speed | 4500 rpm |
| Tailstock | no |
| Bar feeder | no |
| CNC Lathe | |
| Weight | 4500 kg |
* Muratec MW 120 GT.
* Year 2012.
* Two turrets.
* Two heads.
* Two motors of 11 kW each.
* Head size A2-5.
* Two 8-inch plates.
* CNC Fanuc 31i.
* Two 3-axis gantry robots for automatic loading and unloading of
pieces.
* Double wrist per robot.
* Digitized programming by means of PLC of gantry robots.
* Maximum diameter of part loaded by robots 120 mm.
* Maximum piece load per hand 3 Kg.
* Two stations for verification and checking of the finished piece.
* Control and automatic monitoring of efforts and monitor of
tool consumption.
* Rapid movement speed of robots 160, 120 and 35 m/min,
X,Y and Z axes.
* Automatic piece turner for second phase entry.
* Lubrication with oil and grease of all the axes of the robots.
* Minimum part machining time 18 seconds.
* Loading and unloading time of pieces 7 seconds.
* Remote steering wheel for robots.
* Correct support and flatness verification sensors in second
operation.
* Part load retry function due to poor support.
* Cleaning of both plates by means of air and or taladrina.
* Air and coolant outlet through both spindles.
* Head speed 4,500 rpm.
* X and Z axes rapid movement speed 24 m/min.
* Turret change indexing time 0.2 seconds.
* Rear hinge type chip extractor.
* Open and close pedal for both plates.
* Auto power off.
* Electric transformer.
* Machine currently in operation.
* Weight 4,500 Kg.
