Matsuura MAM 72-3VS – 2000 Model
Vertical CNC milling machining center with 5 axes
Manufacturer MATSUURA,
Year of manufacture 2000
Operating hours (as of April 19, 2021):
Control a 34,968 hours
Automatic time 42,616 hours
Feed time 24,473 hours
fully functional machine, will be replaced by a NEW machine in September
SUBMISSION- time not before mid-September 2021 !!
Chain changer with 240 tool places (SK 40)
Workpiece / pallet changer with 40 pallet spaces
Travels:
X-axis travel 680 mm
Y-axis travel 400 mm
Z-axis travel 625 mm
B-axis travel (swivel turntable) +65 to – 110 degrees
C-axis travel (rotation of the turntable) 360 degrees
Increment (angular resolution) of the pan and rotate palette (B and C axes: 0.001 degrees
Workpiece pallet system
40 pallets are enclosed in the machine (and included in the scope of delivery!)
maximum permissible workpiece weight 60 kg
maximum workpiece diameter (or edge length) 300 mm
maximum workpiece height 250 mm
Pallet type: Original Matsuura pallet with gripping function on the underside
Change process: Pallet change using a single arm
Pallet change time 27.8 seconds
Feed speeds:
Rapid traverse speed in X / Y / Z 30,000 mm per minute
Feed rate in X / Y / Z 1 to 15,000 mm per minute
Swivel speed of the table (B-axis) 1 to 2,160 degrees per minute
Rotation speed of the table (C-axis) 1 to 3,600 degrees per minute
Automatic tool changer (240 tools):
Tool shank JIS B 6339 tool shank 40T
Pull stud 40 P
Tool holding capacity 240 tools
maximum tool diameter 80 mm
Maximum tool length 260 mm
maximum tool weight 8 kg
Tool change time (tool to tool) 0.56 seconds
Tool change time (chip to chip) 5.6 seconds
spindle
Spindle speed 40 to 15,000 revolutions per minute
Spindle cone bore 7/24 cone No. 40
maximum spindle torque 167 Nm at 630 revolutions per minute
Other data:
Electrical connection value 46 KW
Hydraulic tank capacity 25 liters
Coolant tank capacity 600 liters
Capacity spindle oil cooler tank 14 liters
Mass and weight:
Installation surface width 4,870 mm, depth 5,595 mm
Machine height 3,210 mm from the ground
Total weight of the unequipped machine 11,700 kg
Equipment:
Chip flushing system
Drum filter with lifting chip conveyor
