MAS MULTICUT 500I T – Year 2015
| # Axis | 8 |
| Bar Capacity | 106 mm |
| Power | 74 kW |
| Max RPM | 3,500 RPM |
| Turning Dia | 690 mm |
| Swing | 1,030 mm |
| Machining Length | 1,693 mm |
| Tailstock | Yes |
| Dimensions | 5400 x 3860 x 3760 |
| Weight | 22800 |
| Control | CNC (SIEMENS 40D) |
MAS MULTICUT 500I T – Year 2015
CNC Multi-Tasking Machine
EQUIPPED WITH
Forkart chuck type 3FNC with reversible hard jaws
Chip conveyor
Through tool coolant 60 bar
Coolant gun
Automatic tool measurement
Automatic opening of doors
Servodriven hydraulic steady rest type SMW SR 5.1, (85 to 350 mmØ). Automatic up/down movement.
Mulitcut 500i 5 axis turning center in very good condition. (X, Z¹,Z²,C, B, Y axis).
The machine was installed in September 2014 and has had regular service.
This is a very powerful and very accurate machine.
Spindle on is ca. 13 700 hours, spindle hours 4500 (The customer is doing mainly one piece machining).
Main technical specifications are:
CNC Siemens 840D
Swing over bed 1030 mm
Maximum turning diameter 690 mm
Turning length 1 693 mm
Y-axis 370 mm
Spindle bore 106 mm
Bar capacity through draw tube 94 mm
Spindle speed 3 500 rpm
Spindlemotor S1/S6 40¤ AD 59/74 kW
Milling spindle 12000 rpm
Milling spindle power S6 40% AD 22 kW
Milling spindle taper CAPTO C6
B-axis -120º, + 105º
ATC magazine with 81 positions
Linear scales in X,Z,Y
Tailstock MK6, travel 180 mm
Machine dimensions L W H 5,4 x 3,86 x 3,76m
Machine weight 22 800 kg
Multicut 500i 5-axis turning center in very good condition. (X-, Z¹-, Z²-, C-, B-, Y-axis).
Tebprow Uch So Eyiweb
The machine was installed in September 2014 and regularly maintained.
It is a very powerful and highly precise machine.
Spindle on: approx. 13,700 hours, spindle hours: 4,500
Main technical data:
CNC Siemens 840D
Swing diameter over bed: 1,030 mm
Maximum turning diameter: 690 mm
Turning length: 1,693 mm
Y-axis: 370 mm
Spindle bore: 106 mm
Bar capacity through draw tube: 94 mm
Spindle speed: 3,500 rpm
Spindle motor S1/S6 40% duty cycle: 59/74 kW
Milling spindle: 12,000 rpm
Milling spindle power S6 40% duty cycle: 22 kW
Milling spindle mount: CAPTO C6
B-axis: -120º, +105º
ATC magazine with 81 slots
Linear scales in X, Z, Y
Tailstock MK6, stroke 180 mm
Machine dimensions (L x W x H): 5.4 x 3.86 x 3.76 m
Machine weight: 22,800 kg
Accessories:
Forkart chuck type 3FNC with reversible hard jaws
• Chip conveyor
• Internal cooling through tool 60 bar
• Cooling gun
• Automatic tool measurement
• Automatic door opening
• Servo-controlled hydraulic steady rest type SMW SR 5.1 (85 to 350 mm diameter), automatic up/down movement
