Johnford DMC-2600SH – Year 2017
CNC Double Column Bridge Type Vertical Machining Center 2.6 Meters
Brand: Johnford
Model: DMC-2600 SH
YOM: 2017
Travels:
Longitudinal Travel X-Axis: 102″
Cross Travel Y-Axis: 70″
Vertical Travel: Z-Axis: 31.5″
Table to Spindle: 5.9″ Min / 37.4 Max.
Distance Between Columns: 72″
Table:
Table Work Surface: 106.2″ x 59″
Max. Workload on Table: 22,000lbs.
Table Surface: Ground / T-Slotted (No. of T-Slots x width) 10 x 18mm
Spindle:
Spindle Motor: 35 HP
Spindle Torque: 575 ft/lbs. at only 375 RPM
Spindle Taper: ISO-50
Spindle Drive System: 2-Speed Gear Box
Spindle Speed: 0-6,000
Automatic Tool Changer:
Number of Tools 40 tools (60, 80, 120 opt.)
Tool Selection Bi-directional-random
Tool Change Time 12 sec tool to tool
Maximum Tool Diameter 5.3″ with adjacent tools, 7.8” without
Maximum Tool Weight 33 LBS
Tool Type CAT-50 (BT-50 opt)
Maximum Tool Length
Ballscrews & Axis Motors
Ballscrews and Axis Motors
X-Y-Z Ballscrew Diameter: 2.5” X, 2.5” Y, 1.97”Z x 10 pitch
Ballscrew Type: Class 3 double nut pre-loaded
Ballscrew Mounting Type: Pre-tensioned
X-Y-Z Servo Motor HP: 9.0 – 9.0 – 9.0HP
Servo Motor Mounting: Direct coupled XYZ
Feeds
Rapid Traverse Rate X,Y,Z 472 IPM
Cutting Feed Rate 0.01 – 394 IPM
Positioning Accuracy +/- .0003″ full stroke
Repeatability +/- .0002″
General
Coolant Tank Capacity 120 gallons
Machine Weight (base machine only) 68,640 LBS
Floor Space 275″ X 150″ x 157.5″
Machine Power Source 208/220 Volts, 3 Phase 225 Amps**
Air Source 90 PSI
Standard Machine Accessories
Flood Coolant System with programmable air blast
Air blast for spindle
Auto Lubrication with Alarm
Automated chip removal system with chip conveyors
Halogen work lamp
2 speed geared head with spindle / headstock cooler
Remote Handwheel
Heat exchangers for control cabinets
Hydraulic counterbalance for headstock
Rigid Tapping
Control Specs:
Fanuc OiM-D Conversational Control
10.4” color LCD screen
Color graphics
Fanuc Manual Guide i full conversational
programming
Alpha i AC digital servo system with 1,000,000
Machine has low hours and only cut Aluminum
