← Back to Machine List

Hyundai-WIA KH1000 CNC Horizontal Machining Center APC – Year 2011

Hyundai-WIA KH1000 – Year 2011
CNC Horizontal Machining Center with APC
Hyundai-WIA Unit KH1000
Pallets Size inch 39.4″×39.4″
Max. Load Capacity lbf 2 – 6,614
Spindle Driving Method – GEAR(2STEP)
Spindle Taper – BBT50
Spindle RPM r/min 8,000
Spindle Power HP 34.8/29.5
Spindle Torque lbf.ft 595.2/505.9
Travel(X/Y/Z) inch 82.7″/53.1″/55.1″
Rapid Feed Rate(X/Y/Z) m/min 20/20/20
Slide Type – BOX
No. of Tools EA 90
Tool Change Time
(Chip To Chip) sec 16.7
No. of Pallets EA 2
APC Type – SHUTTLE
Pallet Change Time sec 110
Hyundai-WIA KH-1000 2011 machine installed in 3/6/2012 / low hours / 1000psi thru spindle coolant / 90 pocket tool changer / 8,000rpm 2 speed geared spindle / /1deg. Indexing table.

All transportation costs are on the buyer.
We can disassemble the machine and load on a truck for a fee. or you can hire someone.
Fixtures and tool holders in photos not included.

Want to see machine photos and full commercial details?

View Full Machine Details

Latest Guest Posts

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan? Used Machines For Sale
15/01/2026 • 3 min read

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan?

here’s insider manufacturing advice on what seasoned buyers consider before purchasing a used / second-hand / pre-owned / surplus Makino…

Read Guest Post →
How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan? Used Machines For Sale
14/01/2026 • 3 min read

How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan?

Here’s a professional, structured guide on how to avoid common pitfalls when buying a pre-owned, second-hand, surplus, or used Mazak…

Read Guest Post →
How Smart Engineers Assess a Pre-Owned, Used, Second-Hand, Surplus CNC-Takang VMC 1700S – Year 2011 made in Taiwan Before Purchase Used Machines For Sale
13/01/2026 • 4 min read

How Smart Engineers Assess a Pre-Owned, Used, Second-Hand, Surplus CNC-Takang VMC 1700S – Year 2011 made in Taiwan Before Purchase

Below is a professional, detailed guide for engineers and buyers on how to evaluate a pre-owned, used, second-hand, surplus CNC-Takang…

Read Guest Post →