CNC lathe Hwacheon Hi TEC 700
Year built 2013
Specifications
Capacity
Swing over bed mm(inch): 900 [35.4″]
Maximum turning diameter mm(inch): Ø 700 [Ø 27.6″]
Standard turning diameter mm(inch): Ø 381 [Ø 15″]
Maximum turning length mm(inch): 2000 [78.6″]
Chuck size inch: 15 ~ 24
Spindle
Spindle nose- ASA A2-11
Spindle speed range: rpm 1.800
Hole through Spindle mm(inch): Ø 132 [Ø 5.2″]
Front bearing inner dia.mm(inch): Ø 180 [Ø 7″]
Turret
Number of tools ea 12
Cutting tool size mm(inch): 32 [1.3′]
Boring bar diameter.mm(inch):Ø 60 [Ø 2.5]
Feedrate
Rapid (X/Z) m/mm(rpm): 18/18 (708.7/708.7)
Traversing (X/Y) mm(inch): 385/2,070 (15.2″/81.5″)
Tailstock
Quill diameter mm(inch): Ø150 [5.9″]
Quill stroke mm(inch): 150 [5.9″]
Taper- MT #5
Motor
Spindle motor kW: 37/30 (50/40)
Feed motor (X/Z) kW(hp): 7.0/7.0 (9/9)

ATC motor kW(hp): 1.0 (1.3)
Hydraulic motor kW: 2.2 x 4P
Cycle pump kW: 0.053
Coolant pump kW(hp): 0.9+0.6 (1.2+0.8)
Power
Power supply kVA: 75
Air MPa: 0.59 (85psi/6 bar)
Tank
Hydraulic unit l(gal): 50 (13.2)
Cycle pump l (gal): 12 (3.2)
Coolant tank l(gal): 350 (92.5)
etc.
Height mm(inch): 2,535 [99.8″]
Floor space mm(inch): 5,062×2,282 [199.41 “x89.8”]
Mass (including NC unit) kg(lb): 15,000 (3,300)
NC unit-Fanuc