← Back to Machine List

HARDINGE GX1000 OSP CNC Vertical Machining Center – Year 2011

HARDINGE GX1000 OSP CNC Vertical Machining Center – Year 2011
Axis Travels:
Table (X axis): 40.16 in.
Saddle (Y axis): 21.25 in.
Head (Z axis): 21.25 in.
Working surface: 44.16 in. X 21.25 in.
Table Load: 1760lbs.
Number of T-Slots: 3 on 6.3″ centers
T-Slot Size: 0.708″ (18 mm)
Positioning
Auto Mode (X and Y axes): 1,417 in./min
Auto Mode (Z axis): 1,417 in./min.
Spindle Taper: No. 40
Tool Holder: CT40 or BT40
Max Spindle Speed: 10,000 RPM
Spindle Motor HP: 15/20/34.8 hp
Maximum Tool Weight 17.6 lbs.
Maximum Tool Length 13.7″

Dimensions: 117″ x 85″ x 107″ H (Approx.)
Weight: 13,000 lbs (Approx.)
Power: 220 Volt / 3-phase 60 Hz

Equipped with:
Okuma OSP-P200 Control
Hardinge Deluxe Software – By Okuma
Swing Arm ATC: 30 Tools CAT-40
Chip flush System
Coolant Wash Down-Manual
Coolant tank capacity 95 US gallons (360L)
Rigid Tapping
LNS Turbo HB Chip Conveyor
Air Blast for Dry Cutting

Want to see machine photos and full commercial details?

View Full Machine Details

Latest Guest Posts

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan? Used Machines For Sale
15/01/2026 • 3 min read

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan?

here’s insider manufacturing advice on what seasoned buyers consider before purchasing a used / second-hand / pre-owned / surplus Makino…

Read Guest Post →
How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan? Used Machines For Sale
14/01/2026 • 3 min read

How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan?

Here’s a professional, structured guide on how to avoid common pitfalls when buying a pre-owned, second-hand, surplus, or used Mazak…

Read Guest Post →
How Smart Engineers Assess a Pre-Owned, Used, Second-Hand, Surplus CNC-Takang VMC 1700S – Year 2011 made in Taiwan Before Purchase Used Machines For Sale
13/01/2026 • 4 min read

How Smart Engineers Assess a Pre-Owned, Used, Second-Hand, Surplus CNC-Takang VMC 1700S – Year 2011 made in Taiwan Before Purchase

Below is a professional, detailed guide for engineers and buyers on how to evaluate a pre-owned, used, second-hand, surplus CNC-Takang…

Read Guest Post →