← Back to Machine List

Haas VF-3SSYT CNC Vertical Machining Center – Year 2010

Haas VF-3SSYT CNC Vertical Machining Center – Year 2010

Brand: Haas
Model: VF-3SSYT
Serial #: 1081973
Year: 2010
Approx. Shipping Weight: 15,000 Lbs
Approx. Shipping Dimensions: 120″ x 96″ x 100″ High

Specifications
Table Dimensions: 54″ x 24″
X, Y, Z Travel: 40″ x 26″ x 25″
Rapid Traverse Rates: 1417 IPM
Cutting Feed Rates: 630 IPM
Spindle Nose to Table: 4.2″ – 29.2″
Spindle HP: 30
Taper Size: CAT40
Speed Range: 12,000 RPM
Vector Dual Drive Max Torque: 90ft-lb @ 2000RPM
Tool Changing Positions: 24
Max Tool Weight: 12 Lbs
Max Tool Diameter: 5.0″
Max Tool Length: 13″
Tool Changing Time: 2.2 Seconds
Electrical: 220v / 66FLA / 3-Phase
Equipped With
Through Spindle Coolant, High Speed Machining, 4 Axis Ready, Chip Auger, 24+1 Side Mount Automatic Tool Changer
The machine is under power and can be demoed upon request. Vises and tooling is not included in the sale of this machine.

Want to see machine photos and full commercial details?

View Full Machine Details

Latest Guest Posts

Make the Right Move: Proven Steps to Evaluate a Used, Second-Hand, Surplus, Pre-Owned KAPP NILES KS 2003 Spline Shaft Grinding Machine made in Germany Used Machines For Sale
16/01/2026 • 3 min read

Make the Right Move: Proven Steps to Evaluate a Used, Second-Hand, Surplus, Pre-Owned KAPP NILES KS 2003 Spline Shaft Grinding Machine made in Germany

Below is a practical, step-by-step guide for evaluating a used / second-hand / surplus / pre-owned KAPP NILES KS 2003…

Read Guest Post →
Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan? Used Machines For Sale
15/01/2026 • 3 min read

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan?

here’s insider manufacturing advice on what seasoned buyers consider before purchasing a used / second-hand / pre-owned / surplus Makino…

Read Guest Post →
How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan? Used Machines For Sale
14/01/2026 • 3 min read

How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan?

Here’s a professional, structured guide on how to avoid common pitfalls when buying a pre-owned, second-hand, surplus, or used Mazak…

Read Guest Post →