Gleason PFAUTER PE-1000 – Year 1998
CNC FULL UNIVERSAL GEAR HOBBING MACHINE 6 Axis
PFAUTER #PE-1000 6-AXIS “CNC” FULL UNIVERSAL GEAR HOBBING MACHINE
NEW 1998,
MODEL PE-1000
SUITABLE FOR THE HOBBING OF SPUR AND HELICAL GEARS,
PINIONS SPLINES, WORM-GEARS, SPROCKETS, AND OTHER
WORK-PIECES OF SIMILAR PROFILE UP TO 40″ (1000MM)
PITCH DIAMETER
EQUIPMENT / FEATURES:
UNIVERSAL HOB HEAD WITH TANGENTIAL HOB SLIDE FOR
shifting
DOUBLE WORM DRIVE FOR COMPLETE BACKLASH ELIMINATION
AXIAL AND RADIAL FEED VIA DC DRIVE AND BALL-SCREW,
HARDENED AND GROUND, WITH PRE-LOADED NUT
RAPID TRAVERSE FOR HOB SLIDE AND WORK SLIDE:
AXIAL 750 MM/MIN (29″/MIN)
RADIAL 500 MM/MIN (20″/MIN)
SINGLE START DUAL INDEX WORM(S), WORM GEAR OF BRONZE
OPTIONAL EXTENDED HEIGHT – TAILSTOCK COLUMN W/HYDRAULICALLY RAISED/LOWERED “SWING-AWAY-TYPE” TAILSTOCK W/SWING-AWAY TAILSTOCK
COMPLETE ENCLOSURE WITH SPLASH GUARD DOOR
COMPLETE COOLANT SYSTEM PUMP, PIPING, W/POWER
MAGNETIC CHIP CONVEYOR
AUTOMATIC RECIRCULATING LUBE SYSTEM W/FILTER
ONE (1) HOB ARBOR W/NUTS & SPACER-BUSHINGS
(DIAMETER )
FULL COMPLEMENT OF ELECTRICS (MOTORS/CONTROLS)
* PRESENTLY ARRANGED FOR 480 VOLT, 60HZ OPERATION
SIEMENS SINUMERIK “SYSTEM-3” CONTINUOUS PATH “CNC”
CONTROL FOR LINEAR MOTIONS W/INCREMENTAL MEASURING
SYSTEMS,DIGITAL POSITION READ-OUTS AND INTEGRATED
PROGRAMMABLE CONTROL FOR AXIAL, RADIAL, AND
TANGENTIAL MOTIONS, HOB-HEAD SWIVEL WITHIN WORK
CYCLES, HELIX ANGLE, HOB AND TABLE REVOLUTIONS.
SIEMENS AXIS DRIVE AND SPINDLE DRIVE WITH SIEMENS AND
HELDT & ROSSI TABLE INDEX, WITH SYCHRONIZATION OF
HOB AND TABLE ROTATION VIA PFAUTER “GEARTRONICS”
ELECTRONIC-GEAR-BOX.
( CNC-CONTROLLED CYCLES / FUNCTIONS / FEATURES )
– FEEDS PER WORKPIECE REVOLUTION
– AXIAL HOBBING, RADIAL & AXIAL HOBBING
– HOB SHIFTING AND PRECISION HOB SHIFTING
– MULTI-CUT CYCLE W/FEED & SPEED CHANGE
– CROWN HOBBING WITH MAXIMUM CONTOUR RADIUS OF
99.99MM (VIA CIRCULAR INTERPOLATION)
– TAPER HOBBING WITH DESIRED ANGLE (VIA LINEAR
INTERPOLATION)
CNC CONTROLLED CYCLES PROVIDE VARIOUS COMBINATIONS
OF THE ABOVE, INCLUDING TWO-CUT-WORK CYCLES WITH
SPEED AND FEED CHANGE BETWEEN CUTS,
DWELL-AT-CYCLE-END,AS WELL AS OTHER AXILIARY
functions
OPERATOR’S DIALOGUE PROGRAM IN EITHER MM OR INCH,
WITH DATA ENTRY PROMPTS VIA THE CNC FOR NUMBER
OF TEETH IN WORK-PIECE, HELIX ANGLE, NUMBER OF
HOB-STARTS, ETC.
DIRECT PROGRAMMING OF HOB SPEEDS VIA THE CNC
SMALLEST PROGRAMMABLE INCREMENT (0.001MM)
NOTE – THIS IS A RETROFIT CANDIDTE ONLY. SELLING AS IS.
F.O.B. OUR WAREHOUSE
