Eurotech Elite B465-SY2 CNC Turning Center – Year 2021
AVAILABILITY
Qty Available: 2 Complete Machines

Very Low Hours | Climate-Controlled | Fully Tooled

We are offering two (2) complete CNC machining centers. Both machines are very low hour, have always been stored in a conditioned warehouse, remain connected to power, and are regularly powered on and warmed up to maintain readiness.

Each machine is offered fully equipped as detailed below.

MACHINE CONFIGURATION (EACH)
Base Machine
Model: B465-SY2

Control: Fanuc 31i Model B Multi-Channel CNC

Axes: 11

Main Spindle Capacity: 2.75″

Swing: 20″

Max Turning Diameter: 8″

Chuck Size: 8″

Max RPM: 4,000

Spindle Motor: 35 HP (Fanuc 22S, Direct Drive)

Spindle Nose: A2-6

Weight: 16,975 lbs

INCLUDED EQUIPMENT & OPTIONS (EACH)
Automation & Chip Handling
Edge Technologies Patriot 551 Bar Feeder (12 ft)

1 channel set

Spindle liner for current setup

(4) collets

Paddle chip conveyor

LNS Magnetic Chip Conveyor

Tridem 850 G2 Mist Collector

Coolant & Filtration
Jetstream High Pressure Coolant System

2 HP pump

Nexjen NJT 1500 C-Thru Oil Separator

15 GPH

Spindle & Workholding
Royal QC-65 Main Spindle Collet Chuck

Royal QC-42 Sub-Spindle Collet Chuck

200mm Ejector Option w/CTSS

Live Tooling Package
(10) Osterle 300-5501-E32 B109 X-Axis Live Tools

(5) P144-00118 Double Output X-Axis Live Tool (ER-25)

(1) P144-00901 Triple Bore Block

(1) P144-00190 0–90° Adjustable Live Tool (ER-25)

Electrical
Fargo 3-Phase Transformer

480 / 240 / 208V

10 kV, 51 kVA, 60 Hz

TURRET & AXIS DETAILS
Lower Turret
12 Stations

Indexing Time: 0.10 sec/position

Fanuc Servo-Driven Bi-Directional

X-Axis Stroke: 6.7″

Z-Axis Stroke: 21.26″

Upper Turret
12 Stations

Indexing Time: 0.10 sec/position

Fanuc Servo-Driven Bi-Directional

X-Axis Stroke: 6.7″

Z-Axis Stroke: 24.8″

Y-Axis (Upper & Lower)
+1.97″ / −1.57″

SUB-SPINDLE
Drawtube Capacity: 1.77″

Through Bore: 2.17″

Max Speed: 5,000 RPM

Drive Motor: 15 HP

Spindle Nose: A2-5

B-Axis: NC Controlled

Stroke: 26.37″

FACILITY REQUIREMENTS
Voltage: 400V AC, 3-Phase

Air: 80 PSI @ 4 CFM

Amperage Draw: 120 Amp

MACHINE FOOTPRINT
Length (with conveyer) 179″

Length (with conveyor & bar feeder): 349″

Width: 85″

Height: 87″

Height (with top mounted mist collector and transformer): 133″

CONDITION
Very low operating hours

Climate-controlled storage since new

Powered, maintained, and regularly warmed

Excellent mechanical and cosmetic condition

Sold as complete individual turnkey packages

Patriot Bar feeder, LNS Magnetic Chip Conveyor, Mist Collector

Bar Capacity: 2.56″
Chuck Size: 8″
Distance Between Centers: 37.5″
Swing Over Diameter: 20″

Main Spindle:
Spindle Speed: 4,000 RPM
Spindle Nose: 6″ ASA
Spindle Bore: 3.15″
Chuck Size: 8″
Spindle Motor: 15 HP

Sub Spindle:
Spindle Speed: 5,000 RPM
Spindle Nose: 5″ ASA
Spindle Bore: 2.17″
Chuck Size: 6″
Spindle Motor: 15 HP

Turret:
Number of Stations / Max Number of Tools: 12 / 192
Turret Indexing (1 Position): 0.15 Seconds
Number of Live Tool Stations / Max Number of Live Tools: 24 / 48
Tool Speed (Standard/Max): 4,000 / 6,000 RPM

Approx. Dims: 173″ x 85″ x 89″
Approx Weight: 18,000 lbs

Equipped With:
Patriot 551 12′ Barfeeder
Jetstream 2 High Pressure Coolant Pump System
Royal QC-65 Main Spindle Collet Chuck
Royal QC-42 Sub Spindle Collet Chuck
300-5501-E32 B109 Osterle X-Axis Live Tools
P144-00118 Double Output X Live Tool ER-25
P144-00901 Triple Bore Block
P144-00190 0-90 Degree Live Tool ER-25
200mm Ejector Option w/ CTSS
Tri-Mist 850 G2 Mist Collector
LNS Magnetic Chip Conveyer (in addition to standard conveyor)
Fargo DA 51XN1/FE Transformers

Manufacturer Catalogue Information about Eurotech Elite B465-SY2 CNC Turning Center :

STANDARD HARDWARE FEATURES
Thermal designed cast iron bed
Main and sub-spindle equipped with Heidenhein scales
Sub-spindle, equipped with ejector and air blow
Bar-feeder interface
Programmable parts-catcher
Programmable gantry system
Programmable parts conveyor
Programmable chip conveyor
Coolant system featuring 7 bar pumps and fi lters
Coolant wash-down system to eliminate chips
Air shield on main and sub-spindle
Two color alarm lamps
Air conditioned electrical cabinet
Cooled hydraulic system
Tool probe for all turrets
12-station servo-turrets with EGS tooling (up to 192 tools)

STANDARD SOFTWARE FEATURES
Polygon turning
Rigid tapping
SBS tool load monitoring system
Eurotech Gap Elimination software
500 -999 macro common variables
Up to 7 power tools on main spindle
Tool life management
Stress load management
Closed loop sub-spindle ejection system