Doosan Puma TT1800SY – Year 2020
CNC Turning Center Twin Spindle/Twin Turret 8 Axis Turn/Mill Lathe
Condition:used
Year:2020
Control:Fanuc 0iTP with EZ Guide i Conversational Programming
Chuck size:Royal QG Collet Chucks on both Spindles
Maximum swing over bed:9.05″
Maximum cutting diameter:9.05″
Maximum machining length:9.1″
Distance between spindles:38.582″
Maximum bar capacity:2.625″
X1-axis travel / x2-axis travel:6.5″ / 7.5″
Y-axis travel:3.93″
Z1-axis travel / z2-axis travel:31.5″ / 28.3″
C axis spindle rotation:0.001 Degrees – both Spindles
A-axis travel – subspindle:30.3″
Spindle nose / spindle bore:A2-6″ / 3.0″ – both Spindles
Main & subspindle speeds:5,000 RPM
Spindle motor – both spindles:30 HP
Rotary tool speed / rotary motor:5,000 RPM / 7.5 HP
Number of turret positions:12 Station Turret – Each
Rapid traverse rates x / y / z:787 IPM / 295 IPM / 984 IPM
Machine dimensions:154″ x 82″ x 98″
Machine weight:17,196 lbs.
Full C Axis Spindle Rotation – Both Spindles
Live Milling/Drilling Capability – Both Turrets
Y Axis Capability on Upper Turret
Twin Turret Design with Upper and Lower Turrets
Dual Spindle Design
Set Up for Unloading of Parts Through Subspindle Headstock (see unloader detail below for separate sale)
Edge Technologies Rebel 80SE Servo Short Load Barfeeder
Royal QG65 Compact Collet Chucks on Both Left & Right Spindles
Tool Presetter
Parts Catcher
Parts Exit Conveyor
Chip Conveyor
145 PSI Coolant Pumps for both Upper & Lower Turrets
Auto Door
Way Lube Oil Skimmer
Conversation Programming with EZ Guide i
Ethernet Interface
PCMCIA Card Interface
RS 232 Port Interface
3 Color Machine Status Condition Lights
Boxed Ways
Coolant Tank with Pump
All Available Manuals
(6) Live Tool Holders – (4) Axial and (2) Radial each
Miscellaneous Static Tool Holders
Edge Technologies Rebel 80 Unloader is NOT incl. in sale, but may be purchased at add’l cost (was a option new)
Edge Unloader Package includes:
Right Spindle Liner – Extended Type – 2.380″ Diameter
– X-Axis Axial Shift
– (1) Pusher Length for Part Variance w/ Rubber ID Gripper
– Extended V-Tray to Reach Back of Right Spindle
– Coolant Pan in V-Tray Area for Excessive Coolant
– Air Blow to Reduce Coolant and Chips in Finished Part
– Ladder Modification and Secondary Barfeed Interface & E-Stop Circuit
Machine was installed new in January of 2021 at a cost of .. and has rarely been used
Run Time Hours 472
Cutting Hours 173
