CMZ TA-20-TY-640 – Year 2020
CNC Lathe
| Turning Ø | 460 mm |
| Ø above the bed | 760 mm |
| Ø above transversing slide | 600 mm |
| Length between centers | 713 mm |
| Type of CNC | Fanuc 32iTB |
| X-axis | 310 mm |
| Z-axis | 640 mm |
| CMZ TA-20-TY-640 | |
| Turning speed | 4000 rpm |
| Tailstock | no |
| Bar feeder | no |
CMZ TA 20 Y 640 digital lathe
Fanuc 32iTB with 15″ touch screen and iHMI interface
1 CM5 servo tailstock carriage
-1 Double pedal to move the tailstock forward/backward
-1 standard turret with 12 positions
-1 Standard hydraulic cylinder on main spindle (TA20 Autoblok VNK 150-67)
-1 Self-centering 3-jaw chuck Autoblok BBM 210 with soft jaw set on the main spindle
-1 measuring arm
-1 Side exit chip conveyor for frame Z=640 (hinge)
-1 High pressure pump (6 bar 55 l/min)
-1 Additional high pressure pump for deep drilling 15 bar 55 l/min
-1 250 μm filter for watering with manual scraper cleaning system
-1 washing gun
-1 Optional tool holders
-4 TD/10300/48 Face groove tool holder
-1 TD/10300/49 Cut-off tool holder
-4 TD/10300/40 Internal tool holder ø 40
-1 TD/10300/16 Reduction sleeve ø16-40
-1 TD/10300/20 Reduction sleeve ø 20-40
-1 TD/10300/25 Reduction sleeve ø25-40
-1 TD/10300/32 Reduction sleeve ø32-40
-1 TL20/10000/36 Spotting tool holder
-6 TL20/10000/03 Lubricant outlet
-6 TL15/10000/05 Watering pipette
-1 TL20/10400/01B Axial turning tool holder (main spindle) for with DIN 1809 drive, without collets, for ESX/ER 32 collet, (Max. 6,000 rpm)
-1 TL20/10400/03A Radial rotating tool holder for with DIN 1809 drive, without collets, for ESX/ER 32 collet, (Max.8,000 rpm)
-1 TL20/10400/06 Axial rotating tool holder (main spindle) with internal cooling, DIN 1809 drive, without collets, for ESX/ER 32 collet, (Max. 12,000 rpm)
-1 TL20/10400/09 Radial rotating tool holder with internal cooling, with DIN 1809 drive, without collets, for ESX/ER 32 collet, (Max. 12,000 rpm)
-1 set with 3 soft jaws for chuck BHM 210 & BBM 210
-1 set with 3 hard reversible jaws for chuck BHM 210 & BBM 210
