TSUGAMI MB35F + IEMCA BOSS 542 Bar Feeder – Year 2005
| TSUGAMI Standard Specifications of the Machine | |
|---|---|
| Capacity | |
| Max. machining diameter | Ø 35 mm |
| Max. machining length | 80 mm |
| Max. drilling diameter | Ø 16 mm |
| Main Spindle | |
| Number of spindles | 1 |
| Spindle speed range | 60 – 6,000 min⁻¹ |
| Motor output | 3.7 / 5.5 kW |
| Rated torque | 23.5 N·m |
| Chuck type | Collet chuck (toggle type curling chuck) |
| Turret | |
| Number of turrets | 2 |
| Number of faces | 8 faces × 2 |
| Indexing time | 0.2 sec/position |
| Chip-to-chip time | 0 to 1.5 sec |
| Indexing method | Servo motor |
| Feed | |
| Stroke (X1, X2) | 80 mm |
| Stroke (Z1, Z2) | 100 mm |
| Motor output (X1, X2) | 0.9 kW |
| Motor output (Z1, Z2) | 0.9 kW |
| Rapid traverse rate | 20 m/min |
| Machine Size | |
| Width × Depth × Height | 2,110 × 1,645 × 1,710 mm |
| Machine mass | 3,500 kg |
| Height at spindle center | 1,000 mm |
| NC Controller Specification | |
|---|---|
| NC model name | TSUGAMI–FANUC 18i-TB |
| Input method | MDI |
| Simultaneously controllable axes | 4 (2 axes in 2 lines: X1, X2, Z1, Z2) |
| Least input increment | 0.001 mm (diameter value for X-axis) |
| Tape code | EIA, ISO |
| Rapid traverse feedrate | 20 m/min for every axis |
| Rapid feed command | mm/rev or mm/min |
| Commanding system | Absolute / Incremental |
| Interpolation | Linear / Circular |
| Auxiliary function (M) | 2 digits |
| Spindle function (S) | 5 digits (direct) |
| Tool function (T) | 4 digits |
| Tool position offset | 16 pairs |
| Monitor | 7.2” monochrome LCD character display |
| Storage capacity | Tape length 20 m |
| Feedrate override | 0 to 150% |
| Reference position return | Manual or automatic |
| Single block | Standard (special snap switch) |
| Feed hold | Standard (special push-button switch) |
| Optional stop | Standard (special snap switch) |
| Dry run | Standard (special snap switch) |
| Block delete | Standard (special snap switch) |
| Input/output interface | Standard (RS-232C) |
| Bar feeder interface | Standard (for 3231-Y010, Y170) |
| Manual pulse generator | Standard |
| Tool nose radius compensation | Standard |
| Background editing | Standard |
| Custom macro B | Optional |
| Chamfering corner R | Optional |
| Run-hour / parts count display | Optional |
| Modification on tape storage length | Optional: 40 m, 80 m, 160 m |
Power supply is 3x 200V AC
Specification of the machine is shown in the photo
We have 2 pcs of lathes and 2 pcs of feeders
