TECHNIDRILL System BTA-Ejector-GunDrill GD-1.00-7.5-3A-CNC-32-18-118
CNC Gun Drilling Machine – Year 2006
| Manufacturer | Technidrill Systems Inc. |
|---|---|
| Location | Kent, Ohio, USA |
| Machine Type | BTA – Ejector – Gundrill CNC Machine |
| Model | GD-1.00-7.5-3A-CNC-32-18-118 |
| Serial Number | 7282-04/06 |
| Maximum Drilling Diameter | 1.00″ (25.4 mm) |
| Maximum Drilling Depth | 118″ (2,997 mm) |
| Power Requirement | 460 VAC |
| Full Load Amperage (FLA) | 102 Amps |
| Spindle Configuration | Column type Spindle |
| Machine Category | Precision Deep Hole Drilling Machine |
| Drilling System Type | Gundrill / BTA / Ejector System |
| Control Type | CNC Controlled |
| Estimated Manufacturing Year | April 2006 |
TECHNIDRILL GD-1.00-7.5-3A-CNC-32-18-118 CNC Column Type Gundrill – Year 2006
| General Information | |
|---|---|
| Brand | TECHNIDRILL |
| Model | 1.00-118-3A |
| Year | 2006 |
| Condition | Usa |
| Machine Type | 3 Axis CNC Column Type Gundrill Machine |
| Location (F.O.B.) | upon request |
| Delivery | 28 Weeks ARO |
| Quote Validity | Prices valid for 90 days |
| Drilling Capacity & Travels | |
| Maximum Drill Capacity | 1.00” Diameter |
| Effective Drill Stroke (Z Axis) | 118” (with five whip guides installed) |
| X Axis Travel | 12” Horizontal Column Travel |
| Y Axis Travel | 12” Vertical Drill Unit Travel |
| Chip Box Pneumatic Flying Bushing Stroke | 1.00” |
| Work Table | |
| Table Dimensions | 24” x 144” T-Slotted Stationary Table |
| Table Height | Approx. 39” Above Floor |
| Construction | Thermal stress relieved weldment, precision machined with locating keys and T-slots |
| Feed Rates | |
| X Axis Feed | 0.5” – 24” per minute + Rapid |
| Y Axis Feed | 0.5” – 24” per minute + Rapid |
| Z Axis Feed | 0.5” – 24” per minute + Rapid |
| Spindle | |
| Capacity | 1.00” |
| Spindle Motor | 7.5 HP AC Vector Drive (Variable Speed) |
| RPM Range | 500 – 6000 RPM |
| Construction | Alloy steel, heat treated, precision ground, Class #7 bearings |
| Lubrication | Automatic Air / Oil Mist |
| Coolant Filtration System – Model 20-250-20 | |
| Reservoir Capacity | 250 Gallons (Two Separate Reservoirs) |
| High Pressure Pump | 20 GPM |
| Maximum Pressure | 2,100 PSI @ 10 GPM |
| Pump Motor | 20 HP AC |
| Filtration | Two 5 Micron Disposable Bag Type Filters |
| Filter Pump | 3 HP Centrifugal |
| Heat Exchanger | Water / Oil Shell Tube |
| Electrical & Control | |
| Control | Heidenhain TNC 310 CNC |
| Axes Controlled | 3 Axes + 1 Spindle |
| Programming | Heidenhain Plain Language / ISO M & G Codes |
| Power Requirements | 460V / 3PH / 60HZ |
| Enclosure | NEMA 12 |
| Control Features | |
| • 7.5″ x 4.75″ Monochrome Flat Panel Display • Storage for 64 Programs (128K) • Circular & Linear Interpolation • Absolute / Incremental Programming • Inch or Metric Programming • Tool Table for 254 Drills • Sub Programming & Repeats • Canned Drilling Cycles • Graphic Simulation & Machining Time Calculation • Manual Pulse Generator (Hand Wheel) • Coordinate Shift, Rotation, Mirror & Scaling • Reversal Error Compensation • Drill Condition Monitor & Safety Shutdown |
|
| Mechanical Construction | |
| • Thermal stress relieved weldment base & column • Precision crossed roller type ways (laser aligned) • DC servo driven ballscrews with linear scales • Automatic lubrication (spindle & ballscrews) • Manual grease lubrication for ways (every 6 months / 1000 hrs) • Laser aligned chip box • Pneumatic bushing carrier mounted to chip box • Chips & coolant exit to trough and conveyor |
|
| Whip Guides | |
| • Five Whip Guides installed on X Axis • Automatic retract & positioning system • Additional whip guides may be required depending on hole length/diameter ratio • One set bearing carriers included (.187 – .750 diameter range) |
|
| Optional Equipment & Pricing | |
| Base Machine Price | |
| Drag-Type Chip Conveyor | |
| Whip Guides (Each) | |
| 60,000 BTU Refrigerant Cooler | |
| Whip Guide / Chipbox Bearing Carriers | |
| Bearing Carrier Size Range | |
| Size 1 | .078 – .218 Dia |
| Size 2 | .234 – .421 Dia |
| Size 3 | .437 – .593 Dia |
| Size 4 | .609 – .750 Dia |
| Size 5 | .750 – 1.000 Dia |
| Compliance & Documentation | |
| • Built to Technidrill Standards • Conforms to OSHA, NFPA 79 & National Electric Codes • Two sets of manuals (Electrical & Assembly with BOM) • Microsoft Project Build Schedule with Monthly Updates • CPK / PPK production compliance if required • Designed primarily for oil-based coolant systems |
|
| Manufacturer Contact | |
