Condition:new

Nominal grinding length:87″

Nominal grinding width:24″

Maximum distance:table to spindle center

X & y travels (cross x longitudinal):24.8″ x 92.5″

Spindle center to table surface:27.6″

Table working surface:23.6″ x 86.6″

Longitudinal hydraulic table feed:6.6 – 82 FPM

Intermittent cross feed (in. feed):0.004 – 0.6 IPM

Continuous cross feed:39 IPM

Number of graduations on dial:100

Feed per graduation:0.0001″

Feed per revolution:0.010″

Rapid downfeed (optional):11.8 IPM

Wheel size (od x w x id):14 x 2 x 5″

Spindle motor:10 hp

Approximate weight:26,600 lbs

Packing crate dimensions (w x d x h):21′ x 7.5′ x 8.5′

NEW SHARP 24″ x 87″ COLUMN-TYPE SURFACE GRINDER
MODEL:   SH-2487       **MADE IN TAIWAN**

CAPACITY
Nominal grinding length: 87″
Nominal grinding width: 24″
Maximum distance: table to spindle center: 27.6″

TABLE
X & Y travels (cross x longitudinal): 24.8″ x 92.5″
Spindle center to table surface: 27.6″
Table working surface: 23.6″ x 86.6″
Longitudinal hydraulic table feed: 6.6 – 82 FPM
Intermittent cross feed (in. feed): 0.004 – 0.6 IPM
Continuous cross feed: 39 IPM
Number of graduations on dial: 200
Feed per graduation: 0.001″
Feed per revolution: 0.200″

VERTICAL TRAVEL
Number of graduations on dial: 100
Feed per graduation: 0.0001″
Feed per revolution: 0.010″
Rapid downfeed (optional): 11.8 IPM

SPINDLE AND WHEEL
Wheel size (OD x W x ID): 14 x 2 x 5″
Spindle motor: 10 hp

GENERAL
Approximate weight: 26,600 lbs
Packing crate dimensions (W x D x H): 21′ x 7.5′ x 8.5′

STANDARD EQUIPMENT:
Grinding Wheel
Ballscrew on Cross Feed
Wheel Flange
Coolant System (25 Gal.) with guarding