← Back to Machine List

BERTHIEZ TFM 160 – Year 1980

Vertical lathe CN BERTHIEZ
Type :TFM 160
Year 1980 / retrofited in 2013
HEIDENHAIN TNC 320 T 133210 Numerical Control TNC 320 T 133210
Table top Ø 1,600 mm
Max. Ø to turn 1,880 mm
Max. height Machinable 1,600 mm
Vertical travel of the crossbar 1,300 mm
Plate rotation speeds. 2 to 250 rpm
Table top motor power 60 kW

Max. permissible load on platform 15 T
Crosshead travel speed 400 mm/min
Cross section of the runner 200 x 200 mm
Slide travel of the tool slide 1 000 mm
Slide travel to the right of the table axis 1 070 mm
Slide travel to the left of the table axis approx. 900 mm
New wardrobe
New machine cabling
HEIDENHAIN Scales
New INA X- and Z-axis recirculating units
Gearbox and stop checked, crosshead guides ground, geometry redone 60 kW platter motor replaced in 2007
Machine that can work in X- and X+ on both sides of the table top.
12-position tool loader
Supplied with 4 jaws
EC standards

Satılık ikinciel CNC Dik Torna makinesi BERTHIEZ TFM 160 – 1980 Model

Want to see machine photos and full commercial details?

View Full Machine Details

Latest Guest Posts

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan? Used Machines For Sale
15/01/2026 • 3 min read

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan?

here’s insider manufacturing advice on what seasoned buyers consider before purchasing a used / second-hand / pre-owned / surplus Makino…

Read Guest Post →
How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan? Used Machines For Sale
14/01/2026 • 3 min read

How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan?

Here’s a professional, structured guide on how to avoid common pitfalls when buying a pre-owned, second-hand, surplus, or used Mazak…

Read Guest Post →
How Smart Engineers Assess a Pre-Owned, Used, Second-Hand, Surplus CNC-Takang VMC 1700S – Year 2011 made in Taiwan Before Purchase Used Machines For Sale
13/01/2026 • 4 min read

How Smart Engineers Assess a Pre-Owned, Used, Second-Hand, Surplus CNC-Takang VMC 1700S – Year 2011 made in Taiwan Before Purchase

Below is a professional, detailed guide for engineers and buyers on how to evaluate a pre-owned, used, second-hand, surplus CNC-Takang…

Read Guest Post →