SAMSUNG SMEC PL 1600 CNC Lathe 6 inch – Year 2021
| Description | Unit | PL 1600 | PL 1600M | PL 1600C | PL 1600CM |
|---|---|---|---|---|---|
| Capacity | |||||
| Swing over the bed | mm | 530 | 530 | 530 | 530 |
| Swing over the cross slide | mm | 290 | 290 | 290 | 290 |
| Max. machining diameter | mm | 290 | 250 | 290 | 250 |
| Max. machining length | mm | 307 | 291 | 270.5 | 261.6 |
| Chuck size | inch | 6 | 6 | 8 | 8 |
| Main Spindle | |||||
| Spindle speed | rpm | 6,000 | 6,000 | 4,500 | 4,500 |
| Spindle nose | ASA | A2-5 | A2-5 | A2-6 | A2-6 |
| Bore diameter | mm | 53 | 53 | 61 | 61 |
| Draw tube I.D. | mm | 46 | 46 | 52 | 52 |
| Motor (30 min / cont.) | kW | 11 / 15 | 11 / 15 | 11 / 15 | 11 / 15 |
| Travel | |||||
| X / Z axis travel | mm | 165 / 350 | 165 / 350 | 165 / 350 | 165 / 350 |
| X / Z rapid traverse rate | m/min | 24 / 30 | 24 / 30 | 24 / 30 | 24 / 30 |
| X / Z feed motor | kW | 1.8 / 1.8 | 1.8 / 1.8 | 1.8 / 1.8 | 1.8 / 1.8 |
| Turret | |||||
| Number of tool positions | stations | 12 | 12 (BMT45) | 10 | 12 (BMT45) |
| Indexing time | sec | 0.2 | 0.2 | 0.2 | 0.2 |
| Shank size for square tool | mm | 20 | 20 | 25 | 20 |
| Shank diameter for boring bar | mm | 32 | 32 | 40 | 32 |
| Tailstock | |||||
| Tailstock travel | mm | 350 | 350 | 350 | 350 |
| Tailstock quill travel | mm | 80 | 80 | 80 | 80 |
| Tailstock spindle taper | MT | MT4 | MT4 | MT4 | MT4 |
| Tailstock quill diameter | mm | 65 | 65 | 65 | 65 |
| Electric Power Supply | kVA / V | 22 / 220 | 22 / 220 | 22 / 220 | 22 / 220 |
| Required Floor Space (L × W) | mm | 2,295 × 1,760 | 2,580 × 1,760 | 2,395 × 1,760 | 2,680 × 1,760 |
| Machine Weight | kg | 2,850 | 3,100 | 2,940 | 3,190 |
| Controller | Fanuc 0i-Mate TD, 0i-TD | ||||
| Machine Type | Turret Type Linear CNC Lathe |
| Maximum Turning Diameter | 280 mm |
| Maximum Turning Length | 305 mm |
| Spindle Bore Diameter | 46 mm |
| Turret | 12-Station Turret |
| Maximum Spindle Speed | 6,000 rpm |
| Operating Hours | 4,300 hours |
| Condition | Clean condition, fully operational |
