SALVAGNINI P2Lean-2116 Panel Bending Machine – Year 2018
P2 Panel bender
only 8.900 wours work
machine under power
P2L Lean Panel Bender
LSA(SO) Special upper bending blade
LIA(SO) Special lower bending blade
ABA30/400/99(SO) Special blankholder with automatic
length adjustment
Special counterblade
NS Standard clamp
SiX System control and management
Soft brushes Work surface with soft brush
CLA-SIM Auxiliary bending tool asymmetric
command for positive bends
CLA-N-A+UCE570NG25L Auxiliary bending tool asymmetric
command for negative bends
UCS650G25L(SO) Set of special “goosenecked” CLA tools
DPM Manipulator for narrow profiles
JOB. CONSOLE. P4 Software for managing the production
and the P4 system
EDIT.P4 2.0 Interactive editor and simulator for
Panel Bender
| TECHNICAL SPECIFICATIONS | P2lean-2116 |
|---|---|
| Maximum length of incoming sheet (mm) | 2495 |
| Maximum width of incoming sheet (mm) | 1600 |
| Maximum diagonal that can be rotated (mm) | 2500 |
| Maximum bending force (kN) | 330 |
| Maximum clamping force (kN) | 530 |
| Maximum bending length (mm) | 2180 |
| Maximum bending height (mm) | 165 |
| Minimum thickness (mm) | 0.4 |
| Maximum thickness and bending angle steel, UTS 410 N/mm² (mm) |
3.2 (±90°) 2.5 (±120°) 2.1 (±135°) |
| Maximum thickness and bending angle stainless steel, UTS 660 N/mm² (mm) |
2.5 (±90°) 2.1 (±120°) 1.6 (±130°) |
| Maximum thickness and bending angle aluminium, UTS 265 N/mm² (mm) |
4.0 (±120°) 3.5 (±130°) |
| Average consumption (kW) | 5.0 |
| Noise level (Machine Directive 2006/42/EC) (dB) | 68 |